Tiny blinky
Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop

Repo for KiCad and FreeCAD project for HackadayU classes
Tiny blinky is an open-source printed circuit board by wyolum, from the wyolum/HackadayU_KiCad_FreeCAD repository on GitHub. It is a 2-layer board of 71.1 × 40.6 mm with 21 parts on 13 nets, routed with 170 tracks and 3 vias.
It is built around the ATTINY85-20PU and WS2812B. Its parts include 4 connectors, 3 diodes, 2 capacitors, 2 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Repo for KiCad and FreeCAD project for HackadayU classes
Hackaday.io Project https://hackaday.io/project/172360-introduction-to-kicad-and-freecad


| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | tiny_blinky:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | WS2812B | tiny_blinky:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3 |
| 1 | 100n | tiny_blinky:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 10k | tiny_blinky:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 2xCR2032 | tiny_blinky:BatteryHolder_Keystone_3024-2x2032 | BT1 |
| 1 | 330E | tiny_blinky:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 470uF/25V | tiny_blinky:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 5V | tiny_blinky:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | AP1117-50 | tiny_blinky:SOT-223-3_TabPin2 | U2 |
| 1 | ATtiny85-20PU | tiny_blinky:DIP-8_W7.62mm | U1 |
| 1 | Dout | tiny_blinky:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | LOGO_hackaday | tiny_blinky:logo_hackaday | G2 |
| 1 | LOGO_skull | tiny_blinky:logo_skull | G1 |
| 1 | SPI | tiny_blinky:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | SW | tiny_blinky:SW_PUSH_6mm_H5mm | SW1 |
| 1 | Vin | tiny_blinky:PinSocket_1x02_P2.54mm_Vertical | J3 |
Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop

spamatica/Cerebra_328_IPS_PCB
A multi preset effect pedal based on FV1



wherron01/pcbforgex
Converts your KiCAD files to 3D printable molds used to press copper tape, as per https://castpixel.itch.io/pcb-forge

cookiemonsternz/StageKit
Stagekit is a 3D-printable, completely hand-solderable diy lighting previs kit.


dcuartielles/semaforos
Proyecto colectivo de realizar semáforos en la mayor cantidad de modos posible.
It measures 71.1 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the ATTINY85-20PU and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wyolum/HackadayU_KiCad_FreeCAD repository on GitHub, at the commit this page was made from: the board is KiCad/tiny_blinky/tiny_blinky.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wyolum before reusing the design.