wyarmstrong/EDES301Introduction to Practical Electrical Engineering
Etch a sketch is an open-source printed circuit board by wyarmstrong, from the wyarmstrong/EDES301 repository on GitHub. It is a 2-layer board of 101.6 × 89.8 mm with 17 parts on 82 nets, routed with 315 tracks and 8 vias.
It is built around the HS24S010B, XL-C3014SURC and XL-C3014UBC, with the XL-C3014UGC among its other parts. Its parts include 9 resistors, 3 diodes, 2 ICs and 2 switches.
Repository for EDES301 course work
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 10kΩ | easyeda2kicad:RES-TH_RK09K1110A0J | R1, R2 |
| 2 | 2011000102 | easyeda2kicad:SW-TH_6P-L5.8-W5.8-P2.00-LS4.5-TL | SW1, SW2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 1 | HS24S010B | easyeda2kicad:LCD-TH_L72.3-W43.0_HS24S010B | U1 |
| 1 | PocketBeagle | Module:BeagleBoard_PocketBeagle | U2 |
| 1 | TYPE-C 16PIN 2MD | easyeda2kicad:USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB-C |
| 1 | XL-C3014SURC | easyeda2kicad:LED-SMD_XL-C3014SURC-1 | LED1 |
| 1 | XL-C3014UBC | easyeda2kicad:LED-SMD_L3.0-W1.3-FD-SIDE_BLUE | LED2 |
| 1 | XL-C3014UGC | easyeda2kicad:LED-SMD_L3.0-W1.3-RD-SIDE_GREEN | LED3 |
DinosaurPotato534/scuffedMP3
This project was originally created with the intention of the creation of a starter kit for highway, however is now bring retroactively journaled for a highway submission due to unforeseen circumstances.
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
It measures 101.6 × 89.8 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the HS24S010B, XL-C3014SURC, XL-C3014UBC and XL-C3014UGC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wyarmstrong/EDES301 repository on GitHub, at the commit this page was made from: the board is project_02/hardware/etch_a_sketch.kicad_pcb and its schematic project_02/hardware/etch_a_sketch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wyarmstrong before reusing the design.