

GamePip Back
- Size
- 134.9 × 102.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 91
- Pads
- 301
- Tracks, vias
- 598, 118
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Mar 2023
- Updated
- 2 Jun 2026
Overview
GamePip Back is an open-source printed circuit board by wrickert, from the wrickert/UntitledElectronics repository on GitHub. It is a 2-layer board of 134.9 × 102.4 mm with 59 parts on 91 nets, routed with 598 tracks and 118 vias.
It is built around the SK6812SIDE-A. Its parts include 12 capacitors, 11 connectors, 10 switches, 6 resistors and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdUntitledElectronics
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G*** |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C8, C9, C10, C11, C12 |
| 4 | SK6812_Side | Bsides22:SK6812_Side | U2, U3, U4, U5 |
| 3 | Conn_01x01 | RedVillage:Threaded_Standoffs | J9, J10, J11 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R7, R10 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C3, C7 |
| 2 | Cap Sense | Bsides22:CapSense | J4, J5 |
| 2 | LED_RGBA | RedVillage:XL-3227RGB_LED | D1, D2 |
| 2 | R_Small | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2.8" Display | RedVillage:Omron_XF2M-4015-1A_1x40-1MP_P0.5mm_Horizontal | J1 |
| 1 | 5.1k | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | A | RedVillage:BZCN-TSC005A_Button | SW4 |
| 1 | B | RedVillage:BZCN-TSC005A_Button | SW6 |
| 1 | Battery | RedVillage:AA_TH | BT1 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW10 |
| 1 | Buzzer | Bsides22:FUET-9032-Buzzer | BZ1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J13 |
| 1 | Down | RedVillage:BZCN-TSC005A_Button | SW2 |
| 1 | ESP32-S2-WROOM-I_M22S2H3200US3Q0_ | KiCad:ESP32S2WROOMIM22S2H3200US3Q0 | IC1 |
| 1 | Left | RedVillage:BZCN-TSC005A_Button | SW3 |
| 1 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Right | RedVillage:BZCN-TSC005A_Button | SW5 |
| 1 | RotaryEncoder_Switch | RedVillage:SIQ-02FVS3_Encoder | SW9 |
| 1 | SW_SPDT | BreadBoardPwr:SK-3296S_switch | SW11 |
| 1 | Start/Sel | RedVillage:StartSel | SW7 |
| 1 | USB_C_Plug_USB2.0 | BadgePirates:USB_C_Receptical-Jing | J2 |
| 1 | Up | RedVillage:BZCN-TSC005A_Button | SW1 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23 | U1 |
More from wrickert/UntitledElectronics
12- 2 layers211.5 × 207 mm

- 2 layers75.2 × 148.5 mm

- 2 layers175.8 × 179.3 mm

- 2 layers153.6 × 171.1 mm

- 2 layers148.9 × 219.8 mm

- 2 layers118.9 × 197.3 mm

- 2 layers134.4 × 141.9 mm

- 2 layers66.7 × 121 mm

- 2 layers66.7 × 121 mm

- 2 layers217 × 77.1 mm

- 2 layers88.1 × 44.6 mm

- 2 layers189.9 × 85.6 mm

Similar boards
- 2 layers89.2 × 103.5 mm

Oas
hubertciebiada/open-ambient-sensor
OAS — Open Ambient Sensor: DIY multi-sensor indoor environmental monitor (CO2, PM, VOC/NOx, temperature/humidity, mmWave presence) on ESP32-C6 with ESPHome / Home Assistant integration
64 parts44GPL-3.0 - 2 layers84.2 × 100 mm

Fabpack out v5 8
yuz207/agentpad13
agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)
126 parts41 - 2 layers44.9 × 71.1 mm

- 4 layers46.1 × 45.6 mm

Avionics mainboard
AFS-pt/PROMETHEUS-1
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1
202 parts15 - 2 layers41 × 55.4 mm

- 2 layers100 × 95.3 mm

- 4 layers112 × 75 mm

- 2 layers97 × 43.3 mm

Questions
How big is the GamePip Back PCB?
It measures 134.9 × 102.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GamePip Back use?
59 parts, built around the SK6812SIDE-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GamePip Back KiCad files?
From the wrickert/UntitledElectronics repository on GitHub, at the commit this page was made from: the board is Badges/RedVillage-Defcon/Schematics/Main/GamePip-Back.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GamePip Back design in my own project?
Its repository states no licence, so its author keeps all rights: ask wrickert before reusing the design.