
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

K7000 is an open-source printed circuit board by wrencrt, from the wrencrt/K7000-remote repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 61 × 43.2 mm with 7 parts on 13 nets, routed with 77 tracks and 0 vias.
An OSH k7000 remote board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R_Potentiometer_Trim | Potentiometer_THT:Potentiometer_Piher_PT-10-V10_Vertical | RV1, RV2, RV3, RV4, RV5, RV6 |
| 1 | Conn_01x13 | Connector_JST:JST_XH_S13B-XH-A-1_1x13_P2.50mm_Horizontal | J1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 61 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wrencrt/K7000-remote repository on GitHub, at the commit this page was made from: the board is k7000.kicad_pcb and its schematic k7000.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).