2 layers52.3 × 10.5 mm
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0
2 layers100 × 70 mm
Microcontroller based Digital IC tester
worldtechno222-max/Microcontroller-based-Digital-IC-testerMicrocontroller-Based Digital IC Tester PCB designed using KiCad and Arduino Nano. This project can test common 14-pin digital ICs using a DIP socket interface. The PCB includes status LEDs, buzzer indication, push-button controls, and LCD header support.
- Size
- 100 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 48
- Pads
- 108
- Tracks, vias
- 215, 25
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 May 2026
- Updated
- 13 May 2026
Overview
Microcontroller based Digital IC tester is an open-source printed circuit board by worldtechno222-max, from the worldtechno222-max/Microcontroller-based-Digital-IC-tester repository on GitHub. It is a 2-layer board of 100 × 70 mm with 29 parts on 48 nets, routed with 215 tracks and 25 vias.
It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdMicrocontroller-based-Digital-IC-tester
Microcontroller-Based Digital IC Tester PCB designed using KiCad and Arduino Nano. This project can test common 14-pin digital ICs using a DIP socket interface. The PCB includes status LEDs, buzzer indication, push-button controls, and LCD header support.
Microcontroller-based-Digital-IC-Tester PCB
A microcontroller-based digital IC tester PCB designed using KiCad and Arduino Nano.
Features
- Arduino Nano based
- DIP-14 IC test socket
- Good/Bad LED indication
- Buzzer alert
- LCD interface
- Push button control
Tools Used
- KiCad
- Arduino Nano
- Through-hole PCB design
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R14, R15 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12, R13 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | GND SEL, VCC SEL |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SELECT, START |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | 0.1uF |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | 100uF |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | Arduino Nano |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | - BUZ + |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | POWER SW |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | LCD |
| 1 | Conn_02x08_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | IC TEST SOCKET |
| 1 | GREEN | LED_THT:LED_D5.0mm | GOOD |
| 1 | RED | LED_THT:LED_D5.0mm | BAD |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | DC IN |
Questions
How big is the Microcontroller based Digital IC tester PCB?
It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Microcontroller based Digital IC tester use?
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Microcontroller based Digital IC tester KiCad files?
From the worldtechno222-max/Microcontroller-based-Digital-IC-tester repository on GitHub, at the commit this page was made from: the board is Kicad_Project/Microcontroller based Digital IC Tester.kicad_pcb and its schematic Kicad_Project/Microcontroller based Digital IC Tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Microcontroller based Digital IC tester design in my own project?
Its repository states no licence, so its author keeps all rights: ask worldtechno222-max before reusing the design.
Similar boards
- 2 layers56 × 20 mm
HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm
E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm
TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm
- 2 layers55 × 58 mm
