2 layers85 × 56 mm
Basicengine
uli/basicengine-pcb
Schematics and PCB layout for the BASIC Engine home computer
115 parts48
2 layers61.3 × 53.3 mm
P42Display
wolfgangfriedrich/P42Display21Arduino Video Display Shield
- Size
- 61.3 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 76
- Pads
- 211
- Tracks, vias
- 514, 65
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Apr 2017
- Updated
- 19 Apr 2024
Overview
P42Display is an open-source printed circuit board by wolfgangfriedrich, from the wolfgangfriedrich/P42Display repository on GitHub. It is a 2-layer board of 61.3 × 53.3 mm with 47 parts on 76 nets, routed with 514 tracks and 65 vias.
It is built around the VS23S010D-L, 74LVC4245AD and AT24C512N. Its parts include 11 capacitors, 11 resistors, 8 connectors, 5 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
VS23S010D-L
LQFP-48(7x7)-40℃~+85℃ 1.5V~3.6V 38Mbps SPI LQFP-48(7x7) Video Interface ICs ROHSVLSI SolutionVideo Interface ICs
74LVC4245AD
SOIC-24-300mil-40℃~+125℃ 1 1.5V~3.6V 1.5V~5.5V 8 Bidirectional Level translator Power-off protection、Output enable high-impedance TTL TTL Tri-State SOIC-24-300mil Translators, Level Shifters ROHSNexperiaTranslators, Level Shifters
AT24C512N
DIP-8-40℃~+85℃ 1.8V~5.5V 100,000 cycles 1MHz 20ms 40 Years 512Kbit Hardware write protection function、Noise suppression function、Page write protection function I2C DIP-8 EEPROM ROHSHGSEMIEEPROM
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitors_SMD:C_0603 | C1, C2, C3, C7, C9, C10, C11 |
| 5 | 22R0 | Resistors_SMD:R_0603 | R1, R2, R7, R8, R9 |
| 4 | 10K0 | Resistors_SMD:R_0603 | R4, R5, R10, R11 |
| 2 | 1uF | Capacitors_SMD:C_0603 | C4, C5 |
| 2 | 30pF | Capacitors_SMD:C_0603 | C6, C8 |
| 2 | LOGO | project:CC-BY-SA | G***, G*** |
| 2 | LOGO | project:logo_small | G***, G*** |
| 1 | 0R | Resistors_SMD:R_0603 | R6 |
| 1 | 1 MEG | Resistors_SMD:R_0603 | R3 |
| 1 | 2Mbit FLASH | SMD_Packages:SOIC-8-N | U4 |
| 1 | 74LVC4245A | Housings_SSOP:TSSOP-24_4.4x7.8mm_Pitch0.65mm | U5 |
| 1 | ARDUINO_UNO_R3_Shield | SHIELD_ARDUINO:ARDUINO_as_UNO_R3_CONTOUR | SH1 |
| 1 | AT24C512 | SMD_Packages:SOIC-8-N | U3 |
| 1 | CG0603MLA | Capacitors_SMD:C_0603 | D1 |
| 1 | NCP1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | VGP0 | Measurement_Points:Measurement_Point_Round-TH_Small | P5 |
| 1 | VGP1 | Measurement_Points:Measurement_Point_Round-TH_Small | P6 |
| 1 | VGP2 | Measurement_Points:Measurement_Point_Round-TH_Small | P7 |
| 1 | VGP3 | Measurement_Points:Measurement_Point_Round-TH_Small | P8 |
| 1 | VS23S010D-L | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | Video Out | project:CUI_RCJ-01x | P1 |
| 1 | XTAL | Crystals:Crystal_SMD_HC49-SD | Y1 |
| 1 | nCS | Measurement_Points:Measurement_Point_Round-TH_Small | P2 |
| 1 | nRD | Measurement_Points:Measurement_Point_Round-TH_Small | P3 |
| 1 | nWR | Measurement_Points:Measurement_Point_Round-TH_Small | P4 |
The 42 most common of 47 parts.
Similar boards
- 2 layers65 × 56.4 mm
- 4 layers94.3 × 52.8 mm
Jetbot mini
NVIDIA-AI-IOT/jetbot_mini
While developing the schematic and layout designs, I used some footprints from SnapEDA; in order to avoid dealing with licensing issues, I will not redistribute those files on this Github and instead link to where you…
188 parts23 - 4 layers78.5 × 80 mm
- 4 layers108 × 25.3 mm
64MB SIMM
herzmx/cps3-nos
CPS3 NOS is an alternative to the original SIMMs for CPS3; currently, the available options include clone SIMMs with old-stock FLASH memory and Ultra SIMMs by DS.
39 parts12 - 4 layers132.1 × 61 mm
Tesla Coil MIDI Synth
ucsbieee/Tesla-Coil-MIDI-Synth
Convert MIDI to pulses to drive our DRSSTC
99 parts4 - 2 layers99 × 91 mm
- 4 layers135.8 × 53.3 mm
Atari ulx3s adapter
Ruebenschus/Atari-FPCartridge
Use an ULX3s FPGA to emulate an Atari ST cartridge
28 parts2
Questions
How big is the P42Display PCB?
It measures 61.3 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the P42Display use?
47 parts, built around the VS23S010D-L, 74LVC4245AD and AT24C512N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the P42Display KiCad files?
From the wolfgangfriedrich/P42Display repository on GitHub, at the commit this page was made from: the board is Design/ver3/P42Display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the P42Display design in my own project?
Its repository states no licence, so its author keeps all rights: ask wolfgangfriedrich before reusing the design.