6 layers50 × 50 mm
Repeat hw
WojtaCZ/repeat-hw
A repository containing hardware files (KiCad project) for the REPEAT board
158 parts
4 layers44 × 33.5 mm
Telinksensor hw
WojtaCZ/telinksensor-hw2HW repository for TLSR8258 based temperature, humidity and pressure sensor
- Size
- 44 × 33.5 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 79
- Nets
- 46
- Pads
- 253
- Tracks, vias
- 469, 223
- Pours
- 267
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Oct 2022
- Updated
- 26 Nov 2023
Overview
Telinksensor hw is an open-source printed circuit board by WojtaCZ, from the WojtaCZ/telinksensor-hw repository on GitHub. It is a 4-layer board of 44 × 33.5 mm with 79 parts on 46 nets, routed with 469 tracks and 223 vias.
It is built around the BMP390, BAV99 and CR2032-BS-6-1, with the MM8130-2600RB8 among its other parts. Its parts include 30 capacitors, 20 resistors, 4 diodes, 3 ICs and 3 connectors.
Main components
4
BMP390
LGA-10(2x2)-40℃~+85℃ 0.6pa/K 1.5uA 1.65V~3.6V 30Kpa~1.25bar 3pa 50pa I2C、SPI Integrated ADC and digital interface、Standby mode、On-chip temperature output Yes LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure Sensors
BAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
CR2032-BS-6-1
-Battery base CR2032 Phosphor bronze - ROHSQ&JButton And Strip Battery Connector
MM8130-2600RB8
SMD-40℃~+85℃ 1 2.1mm 50Ω 6GHz Board Side Inner Bore SMD Coaxial Connectors (RF) ROHSMurataCoaxial Connectors (RF)
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C6, C7, C10, C14, C15, C28, C30 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C11, C25, C26, C27, C31, C32 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R9, R10, R18 |
| 5 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C9, C12, C13, C16 |
| 4 | 1M | Resistor_SMD:R_0603_1608Metric | R5, R11, R20, R21 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R15, R16, R19 |
| 3 | 1k 0.1% | Resistor_SMD:R_0603_1608Metric | R13, R14, R17 |
| 3 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D2, D3, D4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 1 | 0p5 | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 18p | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 1V2 | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | 1n3 | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 1p | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 220p | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 24MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2M2 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 2p | Capacitor_SMD:C_0402_1005Metric | C23 |
| 1 | 2p7 | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 2u2 | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 3W RTD | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | 3n3 | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 47u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | ADC1 | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | ADC2 | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | ADC3 | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | BMP390 | bosh:BMP390 | U3 |
| 1 | CR2032-BS-6-1 | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | MM8130-2600 | murrata:MM8130-2600 | TP11 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RST | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | RTD 2W | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | SCL | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | SDA | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | SHT40 | sensirion:SHT40 | U2 |
| 1 | SOIC bite | soicbite:SOIC_clipProgSmall | J5 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | SW1 |
| 1 | TLSR8258 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias | U1 |
| 1 | VDD | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
Similar boards
- 6 layers50 × 85 mm
- 6 layers53 × 53 mm
Pca20065
busterbn/thingy_91x_kicad
KiCad 10 port of Nordic's Thingy:91 X hardware files (v2.0.0), converted from the original Altium project.
319 parts - 4 layers
Lora node
Mehdi-Ldj/lora-ble-sensor-node
Off-grid LoRa/BLE sensor node — 868 MHz LoRa, 2.4 GHz BLE, solar/LiFePO4
110 partsCERN-OHL-P-2.0 - 6 layers250 × 167.9 mm
- 2 layers100 × 100 mm
- 4 layers40 × 60 mm
TMDT1UC1
GrimGT/Meridian
Tagged ranging and coordinate position system for FRC events. Using UWB ranging with anchors and tags to provide realtime positioning of robots
35 parts1 - 4 layers63.3 × 89.1 mm
HCF Badge
NullByteZero/HCF2025-badge
A repo with both hardware and software files for HCF CTF badge 2025.
16 parts1
Questions
How big is the Telinksensor hw PCB?
It measures 44 × 33.5 mm and has 4 copper layers, 1.58 mm thick.
What parts does the Telinksensor hw use?
79 parts, built around the BMP390, BAV99, CR2032-BS-6-1 and MM8130-2600RB8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Telinksensor hw KiCad files?
From the WojtaCZ/telinksensor-hw repository on GitHub, at the commit this page was made from: the board is telinksensor-hw.kicad_pcb and its schematic telinksensor-hw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Telinksensor hw design in my own project?
Its repository states no licence, so its author keeps all rights: ask WojtaCZ before reusing the design.