
Flex beforespkting
woczach/dactyl_v4
Custom split ergonomic keyboard project based on a Dactyl Manuform-style shell, adapted around a flexible main PCB, a custom thumb cluster, and trackball support.

Custom split ergonomic keyboard project based on a Dactyl Manuform-style shell, adapted around a flexible main PCB, a custom thumb cluster, and trackball support.
Flex is an open-source printed circuit board by woczach, from the woczach/dactyl_v4 repository on GitHub, published under the MIT licence. It is a 2-layer board of 179.4 × 98.3 mm with 78 parts on 47 nets, routed with 1,326 tracks and 56 vias.
Its parts include 35 diodes, 35 switches and 8 connectors.
Custom split ergonomic keyboard project based on a Dactyl Manuform-style shell, adapted around a flexible main PCB, a custom thumb cluster, and trackball support.
This repository contains the KiCad design files, printable case parts, and reference images used during the build.
This project is my own Dactyl-style keyboard design. The main board is a custom flexible PCB, while the extra keys and thumb-cluster approach were informed by an existing open hardware reference.
Design references used for this build:
Dactyl Manuform base shape and layout: ryanis.cool keyboard link
Extra keys for thumb-cluster: MxLEDBitPCB



dactyl_v4/3dForm/printfiles/ contains the printable case, plate, and holder STL files.dactyl_v4/Kicad/flex/ contains the main KiCad project for the flexible PCB design.pictures/ contains reference renders and PCB images used in this README.Prices below reflect the sourced parts actually purchased for this build. Items not covered by that list are left blank.
| Category | Item | Qty | Notes | Total |
|---|---|---|---|---|
| Keys and switches | Womier Retro Brown Gray PBT keycap set | 1 | 138-key Cherry-profile set | 51.39 PLN |
| Keys and switches | PBTfans Doppelganger 40s kit | 1 | Child kit, 40s | 77.19 PLN |
| Keys and switches | MX-compatible switches | 90 | Outemu Silent Cream Yellow Pro, bought as one 90-pack | 71.19 PLN |
| Keys and switches | 1N4148 diodes | 100 | 1N4148W T4 SOD-123, bought as one 100-pack | 5.72 PLN |
| Pointing device and mechanical parts | 34 mm trackball | 1 | GBALL34RN, purple | 47.79 PLN |
| Pointing device and mechanical parts | PMW3360 or PMW3389 sensor | 1 | PMW3389 module | 69.19 PLN |
| Pointing device and mechanical parts | 3 x 6 x 2.5 mm bearings | 5 | Bought as one 5-pack | 9.41 PLN |
| Pointing device and mechanical parts | 3 x 8 mm dowel pins | 10 | M3, bought as one 10-pack | 4.90 PLN |
| Pointing device and mechanical parts | Tindie-supported PCB for sensor assembly | 1 | Use a compatible board as required by the sensor setup | |
| Electrical | RP2040 Black Board USB-C | 2 | Aliexpress boards | |
| Electrical | PJ-320A TRRS connectors | 10 | Bought as one 10-pack | 6.29 PLN |
| Electrical | TRRS cable | 1 | 3.5 mm TRRS spring coiled cable, 90-degree male-to-male | 13.99 PLN |
| Electrical | Flexible PCB fabrication | 1 | Main flex PCB, converted from 30 USD | 110.61 PLN |
| Electrical | Extra PCB fabrication | 1 | Auxiliary PCB, converted from 2 USD | 7.37 PLN |
| Electrical | Kailh hot-swap sockets | 3 | 40-piece packs, CPG1511 | 45.03 PLN |
| Electrical | SK6812MINI-E LEDs | 1 | 100-piece lot | 34.89 PLN |
| Electrical | Wire-wrap or magnet wire spool | 1 | Internal wiring | |
| Mounting | M3 x 6 mm flat head screws | 18 | Bottom plate and microcontroller holder | |
| Mounting | M3 x 8 mm flat head screws | 2 | Microcontroller holder through bottom plate | |
| Mounting | M3 screw inserts | 20 | Heat-set or press-fit, depending on print and process | |
| Other parts | 3D print service | 1 | Case and related printed parts | 100.00 PLN |
Summary price: 654.96 PLN
This repository is a custom project, but it explicitly builds on ideas and references from the following sources:
The main board design in this repository is my own custom flexible PCB adaptation.
This repository is distributed under the license included in LICENSE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | D | Diode_SMD:D_SOD-123F | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +19 |
| 35 | SW_Push | acheron_MXH:MX100H | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +19 |
| 7 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7 |
| 1 | Conn_02x05_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J8 |

woczach/dactyl_v4
Custom split ergonomic keyboard project based on a Dactyl Manuform-style shell, adapted around a flexible main PCB, a custom thumb cluster, and trackball support.


OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop




newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

It measures 179.4 × 98.3 mm and has 2 copper layers, 0.6 mm thick.
78 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the woczach/dactyl_v4 repository on GitHub, at the commit this page was made from: the board is dactyl_v4/Kicad/flex/flex.kicad_pcb and its schematic dactyl_v4/Kicad/flex/flex.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).