Skip to the content
2 layers179.4 × 98.3 mmFlex, the printed circuit board in 3D

Custom split ergonomic keyboard project based on a Dactyl Manuform-style shell, adapted around a flexible main PCB, a custom thumb cluster, and trackball support.

Size
179.4 × 98.3 mm
Copper layers
2
Thickness
0.6 mm
Parts
78
Nets
47
Pads
360
Tracks, vias
1,326, 56
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Mar 2026
Updated
19 Mar 2026

Overview

Flex is an open-source printed circuit board by woczach, from the woczach/dactyl_v4 repository on GitHub, published under the MIT licence. It is a 2-layer board of 179.4 × 98.3 mm with 78 parts on 47 nets, routed with 1,326 tracks and 56 vias.

Its parts include 35 diodes, 35 switches and 8 connectors.

README

README.md

Dactyl v4

Custom split ergonomic keyboard project based on a Dactyl Manuform-style shell, adapted around a flexible main PCB, a custom thumb cluster, and trackball support.

This repository contains the KiCad design files, printable case parts, and reference images used during the build.

Overview

This project is my own Dactyl-style keyboard design. The main board is a custom flexible PCB, while the extra keys and thumb-cluster approach were informed by an existing open hardware reference.

Design references used for this build:

Gallery

3D keyboard visualization

3D keyboard visualization

Main flexible PCB

Main PCB

Extra keys / thumb cluster reference

MxLEDBitPCB reference for extra keys

Repository Contents

  • dactyl_v4/3dForm/printfiles/ contains the printable case, plate, and holder STL files.
  • dactyl_v4/Kicad/flex/ contains the main KiCad project for the flexible PCB design.
  • pictures/ contains reference renders and PCB images used in this README.

Hardware Summary

  • Split ergonomic Dactyl-style keyboard
  • Custom flexible main PCB
  • Separate thumb / extra-key area inspired by MxLEDBitPCB
  • Trackball support using a PMW3360 or PMW3389 sensor
  • Dual RP2040 controller setup with TRRS interconnect

Bill of Materials

Prices below reflect the sourced parts actually purchased for this build. Items not covered by that list are left blank.

CategoryItemQtyNotesTotal
Keys and switchesWomier Retro Brown Gray PBT keycap set1138-key Cherry-profile set51.39 PLN
Keys and switchesPBTfans Doppelganger 40s kit1Child kit, 40s77.19 PLN
Keys and switchesMX-compatible switches90Outemu Silent Cream Yellow Pro, bought as one 90-pack71.19 PLN
Keys and switches1N4148 diodes1001N4148W T4 SOD-123, bought as one 100-pack5.72 PLN
Pointing device and mechanical parts34 mm trackball1GBALL34RN, purple47.79 PLN
Pointing device and mechanical partsPMW3360 or PMW3389 sensor1PMW3389 module69.19 PLN
Pointing device and mechanical parts3 x 6 x 2.5 mm bearings5Bought as one 5-pack9.41 PLN
Pointing device and mechanical parts3 x 8 mm dowel pins10M3, bought as one 10-pack4.90 PLN
Pointing device and mechanical partsTindie-supported PCB for sensor assembly1Use a compatible board as required by the sensor setup
ElectricalRP2040 Black Board USB-C2Aliexpress boards
ElectricalPJ-320A TRRS connectors10Bought as one 10-pack6.29 PLN
ElectricalTRRS cable13.5 mm TRRS spring coiled cable, 90-degree male-to-male13.99 PLN
ElectricalFlexible PCB fabrication1Main flex PCB, converted from 30 USD110.61 PLN
ElectricalExtra PCB fabrication1Auxiliary PCB, converted from 2 USD7.37 PLN
ElectricalKailh hot-swap sockets340-piece packs, CPG151145.03 PLN
ElectricalSK6812MINI-E LEDs1100-piece lot34.89 PLN
ElectricalWire-wrap or magnet wire spool1Internal wiring
MountingM3 x 6 mm flat head screws18Bottom plate and microcontroller holder
MountingM3 x 8 mm flat head screws2Microcontroller holder through bottom plate
MountingM3 screw inserts20Heat-set or press-fit, depending on print and process
Other parts3D print service1Case and related printed parts100.00 PLN

Summary price: 654.96 PLN

Attribution

This repository is a custom project, but it explicitly builds on ideas and references from the following sources:

  • Ryanis Cosmos for the Dactyl Manuform base geometry and layout exploration
  • Swanmatch MxLEDBitPCB for ideas around extra keys and thumb-cluster implementation

The main board design in this repository is my own custom flexible PCB adaptation.

License

This repository is distributed under the license included in LICENSE.

Parts

78
QtyValueFootprintReferences
35DDiode_SMD:D_SOD-123FD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +19
35SW_Pushacheron_MXH:MX100HSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +19
7Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1, J2, J3, J4, J5, J6, J7
1Conn_02x05_Counter_ClockwiseConnector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_VerticalJ8

More from woczach/dactyl_v4

1
  • 2 layers164.1 × 115.5 mmFlex beforespkting, the printed circuit board in 3D

    Flex beforespkting

    woczach/dactyl_v4

    Custom split ergonomic keyboard project based on a Dactyl Manuform-style shell, adapted around a flexible main PCB, a custom thumb cluster, and trackball support.

    77 partsMIT

Similar boards

  • 2 layers57 × 75 mmTriple adapter, the printed circuit board in 3D

    Triple adapter

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    78 parts990GPL-3.0
  • 2 layers68.5 × 34.5 mmTERES PCB5-KEYBOARD Rev.A, the printed circuit board in 3D

    TERES PCB5-KEYBOARD Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    78 parts578Apache-2.0
  • 2 layers66.4 × 48.1 mmESP32, the printed circuit board in 3D

    ESP32

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    78 parts456
  • 2 layers110.5 × 111.1 mmTeensy eurorack breakout, the printed circuit board in 3D

    Teensy eurorack breakout

    newdigate/teensy-eurorack

    Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

    78 parts259MIT
  • 2 layers65 × 56 mmKeyboard whiz, the printed circuit board in 3D

    Keyboard whiz

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    78 parts253GPL-3.0
  • 2 layers43.2 × 128.3 mmXyab, the printed circuit board in 3D

    Xyab

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    78 parts227

Questions

How big is the Flex PCB?

It measures 179.4 × 98.3 mm and has 2 copper layers, 0.6 mm thick.

What parts does the Flex use?

78 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flex KiCad files?

From the woczach/dactyl_v4 repository on GitHub, at the commit this page was made from: the board is dactyl_v4/Kicad/flex/flex.kicad_pcb and its schematic dactyl_v4/Kicad/flex/flex.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flex design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).