Skip to the content
2 layers21.5 × 26.5 mmMux, the printed circuit board in 3D

Re-usable test jig controller

Size
21.5 × 26.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
17
Pads
50
Tracks, vias
101, 22
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
15 Nov 2021
Updated
5 Feb 2024

Overview

Mux is an open-source printed circuit board by wntrblm, from the wntrblm/Hubble repository on GitHub. It is a 2-layer board of 21.5 × 26.5 mm with 11 parts on 17 nets, routed with 101 tracks and 22 vias.

It is built around the TMUX6209PW. Its parts include 4 capacitors, 3 resistors, 2 connectors and 1 IC.

Main components

1

README

README.md

Hubble

Hubble is Winterbloom's re-usable development board for test jigs.

Repository layout

This repository contains the hardware design files and firmware files for Hubble.

  • firmware/ contains the firmware source code, build scripts, and third-party dependencies. The firmware is written in C using GCC ARM.
  • hardware/ contains the hardware design files for the mainboard, jackboard, panel, and programming board. These are all created using KiCAD.
  • mechanical/ contains various designs for laser-cut and 3d-printed parts used to modify the stock test jig assembly for Hubble.

License and contributing

Hubble is open-source hardware and software, however, licensing a project like this is a little complicated. Please take a chance to review the LICENSE file.

We welcome contributions! Please read our Contributing Guide and Code of Conduct.

Parts

11
QtyValueFootprintReferences
310kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3
20.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C4
21uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3
1LOGOwinterbloom:Extra_Long_Wiggly_Boi_25mmG***
1LeftConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ1
1RightConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ2
1TMUX6209Package_SO:TSSOP-16_4.4x5mm_P0.65mmU1

More from wntrblm/Hubble

9
  • 4 layers114 × 120 mmHubble, the printed circuit board in 3D

    Hubble

    wntrblm/Hubble

    Re-usable test jig controller

    335 parts23
  • 2 layers21.6 × 58.4 mmLeds, the printed circuit board in 3D

    Leds

    wntrblm/Hubble

    Re-usable test jig controller

    41 parts23
  • 2 layers100 × 100 mmIo lens.pcb, the printed circuit board in 3D

    Io lens.pcb

    wntrblm/Hubble

    Re-usable test jig controller

    40 parts23
  • 2 layers27.1 × 24 mm12 bit analog out, the printed circuit board in 3D

    12 bit analog out

    wntrblm/Hubble

    Re-usable test jig controller

    31 parts23
  • 2 layers27.1 × 24 mm16 bit analog out, the printed circuit board in 3D

    16 bit analog out

    wntrblm/Hubble

    Re-usable test jig controller

    30 parts23
  • 2 layers50.8 × 38.7 mmPower, the printed circuit board in 3D

    Power

    wntrblm/Hubble

    Re-usable test jig controller

    29 parts23
  • 2 layers26.9 × 68.6 mmMcu, the printed circuit board in 3D

    Mcu

    wntrblm/Hubble

    Re-usable test jig controller

    27 parts23
  • 2 layers27.1 × 18.5 mmAnalog in buffers, the printed circuit board in 3D

    Analog in buffers

    wntrblm/Hubble

    Re-usable test jig controller

    24 parts23
  • 2 layers26.7 × 27.9 mmJacks, the printed circuit board in 3D

    Jacks

    wntrblm/Hubble

    Re-usable test jig controller

    6 parts23

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Mux PCB?

It measures 21.5 × 26.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mux use?

11 parts, built around the TMUX6209PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mux KiCad files?

From the wntrblm/Hubble repository on GitHub, at the commit this page was made from: the board is hardware/breakouts/mux/mux.kicad_pcb and its schematic hardware/board/analog-ins-low-voltage.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mux design in my own project?

Its repository states no licence, so its author keeps all rights: ask wntrblm before reusing the design.