

Re-usable test jig controller
- Size
- 26.9 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 66
- Pads
- 192
- Tracks, vias
- 439, 37
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Nov 2021
- Updated
- 5 Feb 2024
Overview
Mcu is an open-source printed circuit board by wntrblm, from the wntrblm/Hubble repository on GitHub. It is a 2-layer board of 26.9 × 68.6 mm with 27 parts on 66 nets, routed with 439 tracks and 37 vias.
It is built around the ATSAMD51J20A-MU. Its parts include 10 capacitors, 5 resistors, 4 diodes, 4 connectors and 1 IC. It belongs with the SAM D and SAM boards of this library.
Main components
1README
README.mdHubble
Hubble is Winterbloom's re-usable development board for test jigs.
Repository layout
This repository contains the hardware design files and firmware files for Hubble.
- firmware/ contains the firmware source code, build scripts, and third-party dependencies. The firmware is written in C using GCC ARM.
- hardware/ contains the hardware design files for the mainboard, jackboard, panel, and programming board. These are all created using KiCAD.
- mechanical/ contains various designs for laser-cut and 3d-printed parts used to modify the stock test jig assembly for Hubble.
License and contributing
Hubble is open-source hardware and software, however, licensing a project like this is a little complicated. Please take a chance to review the LICENSE file.
We welcome contributions! Please read our Contributing Guide and Code of Conduct.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C7, C8, C9, C10 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x26 | Connector_PinSocket_2.54mm:PinSocket_1x26_P2.54mm_Vertical | J3, J4 |
| 1 | 300mA | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y1 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | ACT | winterbloom:LED_0805_Kingbright_APT2012 | D4 |
| 1 | ATSAMD51J20A-M | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP3.8x3.8mm | U2 |
| 1 | Dotstar | winterbloom:Dotstar_5050 | D3 |
| 1 | POWER | winterbloom:LED_0805_Kingbright_APT2012 | D1 |
| 1 | RESET | winterbloom:Tactile_Switch_4.2mm | SW1 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J2 |
| 1 | USB | winterbloom:LED_0805_Kingbright_APT2012 | D2 |
| 1 | USB_B_Receptacle | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |
More from wntrblm/Hubble
9- 4 layers114 × 120 mm

- 2 layers21.6 × 58.4 mm

- 2 layers100 × 100 mm

- 2 layers27.1 × 24 mm

- 2 layers27.1 × 24 mm

- 2 layers50.8 × 38.7 mm

- 2 layers27.1 × 18.5 mm

- 2 layers21.5 × 26.5 mm

- 2 layers26.7 × 27.9 mm

Similar boards
- 4 layers17.4 × 53.1 mm

Greenpill
Stary2001/greenpill
a samd51 dev board, mimicking the bluepill/blackpill stm32 board design
34 parts1 - 2 layers100 × 100 mm

- 2 layers47.6 × 27.3 mm

- 2 layers77.4 × 77.4 mm

CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm

- 2 layers40 × 40 mm

- 2 layers22 × 42 mm

Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm

PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT
Questions
How big is the Mcu PCB?
It measures 26.9 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mcu use?
27 parts, built around the ATSAMD51J20A-MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mcu KiCad files?
From the wntrblm/Hubble repository on GitHub, at the commit this page was made from: the board is hardware/breakouts/mcu/mcu.kicad_pcb and its schematic hardware/board/analog-ins-low-voltage.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mcu design in my own project?
Its repository states no licence, so its author keeps all rights: ask wntrblm before reusing the design.