wlph17/SALT-PCBSALT v1 is an open-source printed circuit board by wlph17, from the wlph17/SALT-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 41.8 × 28 mm with 18 parts on 52 nets, routed with 46 tracks and 23 vias.
It is built around the DWM3001CDK, CR2032 and SM6T12A, with the TC2050-IDC-NL among its other parts. Its parts include 5 capacitors, 2 resistors, 2 ICs, 1 diode and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C6 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 22p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 316k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 330n | SRP4020TA-R33M:IND_SRP4020TA-R33M | L1 |
| 1 | CR2032 | BHX1-2032-SM:BAT_BHX1-2032-SM | BT1 |
| 1 | DWM3001C | Custum_Library:DWM3001C | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | SM6T12A | Diode_SMD:D_SMB | D2 |
| 1 | SON50P200X200X80-9N | TPS61021ADSGR:TPS61021ADSGR | U2 |
| 1 | TC2050-IDC | Custum_Library:TC2050-IDC | J1 |
| 1 | ~ | RS-032G05A3-SMRT:SW_RS-032G05A3-SMRT | S1 |
The 15 most common of 18 parts.
It measures 41.8 × 28 mm and has 2 copper layers, 1 mm thick.
18 parts, built around the DWM3001CDK, CR2032, SM6T12A and TC2050-IDC-NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wlph17/SALT-PCB repository on GitHub, at the commit this page was made from: the board is SALT_v1.kicad_pcb and its schematic SALT_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
GraniteGobbler/UWBkit
This is a repository containing firmware from two other repositories and is released under their license: - DWM3001C-starter-firmware, by Uberi (as of 02c341b) - SSD1306-LCD-on-NRF52, by jimmywong2003 (as of 4ca746a)
Enapter/ucm-kit-open-hardware
Enapter UCM Kit – open hardware for connecting your energy devices.
Lucas-Poulos/uwb-rescue-locator
The fixed reference station. Open bay-station.kicadpro in KiCad.
Pealie/Thin-Pod-Gateway-rev-0.1
OSHWA Certified Open Source Hardware · UK000092 Certified 16 July 2026 · View certification record
