Skip to the content
2 layers77.5 × 106 mmPracticeschematic, the printed circuit board in 3D

100 days of 100 projects ;)

Size
77.5 × 106 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
40
Pads
73
Tracks, vias
73, 19
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Nov 2025
Updated
11 Feb 2026

Overview

Practiceschematic is an open-source printed circuit board by wlatif-cmyk, from the wlatif-cmyk/100daysofprojects repository on GitHub. It is a 2-layer board of 77.5 × 106 mm with 7 parts on 40 nets, routed with 73 tracks and 19 vias.

It is built around the ESP32-S2-WROVER-I(4M) and AM2302. Its parts include 2 capacitors, 2 ICs, 1 resistor and 1 switch. It belongs with the ESP32 boards of this library.

Main components

2

README

README.md

100 Days of Projects — TikTok Series

https://www.tiktok.com/@yappingaddiction

https://www.instagram.com/yappingaddiction/

Welcome to my 100-day challenge!

Every day, I build something small, fun, or weird — and post it on TikTok.

This repo collects the code, notes, and mini-projects from each day.

Follow along as this slowly turns into a chaotic but glorious archive of experiments.


📆 Daily Projects

Day 1 — Traffic light system

Day 2 — Light meter that runs off of ultrasonic sensor

Day 3 — Ball game with LCD Module

Day 4 — Fan Motion Detection

Day 5 — LED colour changer

Day 6 — Anti-procrastination tool

Day 7 — Anti-procrastination tool major improvements - added timer, timer reset button, and improved screen contrasting

Day 8 — LED Night light

Day 9 — Button piano

Day 10 — Improvements to LED night light - added alarm system

Day 11 — Clothing temperature/humidity sensor

Day 12 — Arduino project generator

Day 13 — Servo motor joystick control

Day 14 — Servo motor joystick control + Remote control using IR sensors

Day 15 — Budgeting dashboard site

Day 16 — Servo motor hand recognition control

Day 17 — Servo motor hand recognition control2 - same concept but motor moves when hand open/closes

Day 18 — Interview prep tool to prioritize/learn proper eye contact

Day 19 — Funny face tool using OpenCV

Day 20 — Advanced touchless volume controller

Day 21 — Motion gesture controlled brightness

Day 22 — Motion gesture cursor

Day 23 — Spotify playlist analyzer

Day 24 — Currency converter

Day 25 — Weather app

Day 26 — To do list app

Day 27 — "Panda" - designer player upon detection of panda plushie

Day 28 — Basic chatbot

Day 29 — Number guesser

Day 30 — Motion gesture controlled LED

Day 31 — RFID card reader

Day 32 — Password manager

Day 33 — Expense Tracker

Day 34 — Soldered project (no code)

Day 35 — Cheat code controlled door lock

Day 36 — Added pin unlock on phone for door lock

Day 37 — Built final prototype for door lock

Day 38 — Portable system wiring (No code)

Day 39 — Joystick controlled cursor

Day 40 — Hypnotic art drawing game on python

Day 41 — Esp32 portable communication led project

Day 42 — Mood bot

Day 43 — Mini Spotify display

Day 44 — Added buttons to Spotify display

Day 45 — Math alarm clock

Day 46 — Improved math alarm clock

Day 47 — STM32 power modes

Day 48 — Pong on joysticks

Day 49 — ESP32 WIFI network ranking

Day 50 — Balloon popper

Day 51 — Productivity measure using CV

Day 52 — ESP32 WIFI channel interference detector

Day 53 — Improved day 18 project (interview eye contact detector) to give score afterward

Parts

7
QtyValueFootprintReferences
10.1uFCapacitor_SMD:CP_Elec_3x5.3C1
11uFCapacitor_SMD:CP_Elec_3x5.3C2
14.7kResistor_SMD:R_0201_0603MetricR1
1AM2302Sensor:ASAIR_AM2302_P2.54mm_VerticalU3
1ESP32-S2-WROVERRF_Module:ESP32-S2-WROVERU1
1GNDBattery:BatteryHolder_TruPower_BH-331P_3xAA3.3v1
1SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1

More from wlatif-cmyk/100daysofprojects

8
  • 4 layers22.4 × 32.2 mmWristwearablepcb, the printed circuit board in 3D

    Wristwearablepcb

    wlatif-cmyk/100daysofprojects

    100 days of 100 projects ;)

    40 parts8
  • 2 layers34.6 × 38.4 mmPcbchallenge1, the printed circuit board in 3D

    Pcbchallenge1

    wlatif-cmyk/100daysofprojects

    100 days of 100 projects ;)

    19 parts8
  • 2 layers25.6 × 26.6 mmFlu detect, the printed circuit board in 3D

    Flu detect

    wlatif-cmyk/100daysofprojects

    100 days of 100 projects ;)

    10 parts8
  • 2 layers25 × 26.5 mmFlu excite, the printed circuit board in 3D

    Flu excite

    wlatif-cmyk/100daysofprojects

    100 days of 100 projects ;)

    8 parts8
  • 2 layers100.2 × 92.6 mmLightdetection, the printed circuit board in 3D

    Lightdetection

    wlatif-cmyk/100daysofprojects

    100 days of 100 projects ;)

    8 parts8
  • 2 layers94.6 × 64 mmAlarmsystem, the printed circuit board in 3D

    Alarmsystem

    wlatif-cmyk/100daysofprojects

    100 days of 100 projects ;)

    7 parts8
  • 2 layers18 × 19.8 mmArduinonanosensorhub, the printed circuit board in 3D

    Arduinonanosensorhub

    wlatif-cmyk/100daysofprojects

    100 days of 100 projects ;)

    7 parts8
  • 2 layers41.7 × 49.9 mmCurrentverification, the printed circuit board in 3D

    Currentverification

    wlatif-cmyk/100daysofprojects

    100 days of 100 projects ;)

    6 parts8

Similar boards

  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers46.5 × 38.1 mmMainboard smd, the printed circuit board in 3D

    Mainboard smd

    OpenHumidistat/hardware

    KiCAD design files for PCBs for the OpenHumidistat humidity controller

    30 parts4
  • 2 layersMars rover navigation system, the printed circuit board in 3D

    Mars rover navigation system

    tjiuce/rover

    Rover Navigation Optimization System (R-NOS): An ESP32-powered autonomous robotic prototype designed for real-time environmental monitoring.

    4 parts4
  • 2 layersWeather balloon V1.0, the printed circuit board in 3D

    Weather balloon V1.0

    Launchpad-Incubator/weather-balloon

    The research repository for Launchpad's flat-packed weather balloons.

    3 parts2
  • 2 layersPriject 2 ESP32 build, the printed circuit board in 3D

    Priject 2 ESP32 build

    Aanuoluwap/555blinker

    This repository contains electronics design projects created using KiCad.

    12 parts1MIT
  • 2 layers100 × 100 mmGasGuard, the printed circuit board in 3D

    GasGuard

    pasinduh2002/GasGuard

    IoT and ML-based LPG monitoring system with ESP32 leak detection, automatic valve shutoff, real-time mobile alerts and refill prediction. Built with React Native, Firebase and Python.

    14 parts1MIT
  • 2 layers125 × 68 mmLights, the printed circuit board in 3D

    Lights

    aarusso-nyx/Luce

    ESP32 firmware project built with PlatformIO + ESP-IDF.

    27 parts
  • 2 layers94 × 68.5 mmWireless temp sensor, the printed circuit board in 3D

    Wireless temp sensor

    Akilesh-10/Wireless_Temperature_Sensor

    This is pcb project

    21 parts

Questions

How big is the Practiceschematic PCB?

It measures 77.5 × 106 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Practiceschematic use?

7 parts, built around the ESP32-S2-WROVER-I(4M) and AM2302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Practiceschematic KiCad files?

From the wlatif-cmyk/100daysofprojects repository on GitHub, at the commit this page was made from: the board is kicad/practiceschematics/Practiceschematic/Practiceschematic/Practiceschematic.kicad_pcb and its schematic kicad/algaephotobioreactor/algae_photobioreactor/flu_excite.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Practiceschematic design in my own project?

Its repository states no licence, so its author keeps all rights: ask wlatif-cmyk before reusing the design.