2 layers290.1 × 130 mm
2 layers31.5 × 47.5 mm
IR LED Controller
wkkoes/IR-LED-ControllerCustom STM32-based PCB for an IR-controlled RGB LED driver with a USB-C power interface. Designed in KiCad and Zephyr RTOS firmware.
- Size
- 31.5 × 47.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 33
- Pads
- 82
- Tracks, vias
- 185, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Jul 2026
- Updated
- 8 Jul 2026
Overview
IR LED Controller is an open-source printed circuit board by wkkoes, from the wkkoes/IR-LED-Controller repository on GitHub. It is a 2-layer board of 31.5 × 47.5 mm with 17 parts on 33 nets, routed with 185 tracks and 20 vias.
It is built around the AMS1117-3.3. Its parts include 5 resistors, 3 capacitors, 3 ICs, 3 transistors and 3 connectors. It belongs with the STM32 boards of this library.
Main components
1Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100 | Resistor_SMD:R_0805_2012Metric | R3, R4, R5 |
| 3 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | STM32G030F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | TSOP382xx | OptoDevice:Vishay_MOLD-3Pin | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Questions
How big is the IR LED Controller PCB?
It measures 31.5 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IR LED Controller use?
17 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IR LED Controller KiCad files?
From the wkkoes/IR-LED-Controller repository on GitHub, at the commit this page was made from: the board is IR_LED_Controller.kicad_pcb and its schematic IR_LED_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IR LED Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask wkkoes before reusing the design.
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407