

24 volt power supply
case and pcb to make your fire alarm switch into a light switch for your wall
- Size
- 75 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 9
- Pads
- 35
- Tracks, vias
- 40, 0
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Jun 2026
- Updated
- 7 Nov 2026
Overview
24 volt power supply is an open-source printed circuit board by wish4snow, from the wish4snow/fire-switch-for-light-switch repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 75 × 55 mm with 19 parts on 9 nets, routed with 40 tracks and 0 vias.
Its parts include 6 connectors, 3 diodes, 2 capacitors, 2 resistors and 1 switch. It belongs with the power boards of this library.
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01_Pin | Connector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD3.6mm | J2, J3, J5, J6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad_TopOnly | H1, H2, H3, H4 |
| 2 | 1N4003 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2, D3 |
| 1 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1u | Capacitor_THT:C_Rect_L26.5mm_W11.5mm_P22.50mm_MKS4 | C1 |
| 1 | 24V | Diode_THT:D_A-405_P7.62mm_Horizontal | D1 |
| 1 | 560 | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R1 |
| 1 | Conn_01x02_Pin | Connector_Wire:SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm | J1 |
| 1 | LOGO | test:high_voltage_image | G*** |
| 1 | Relay_SPDT | J1071CS24VDC.36:Relay_Cit_J1071CS24VDC.36 | K1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBLC_1x02_P5.00mm_Horizontal | J4 |
Similar boards
- 2 layers43.9 × 27.7 mm

- 2 layers50 × 60 mm

Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm

ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm

- 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm

- 2 layers25.4 × 25.4 mm

Ina169
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
19 parts282 - 2 layers58.4 × 28.6 mm

New rele
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
19 parts269
Questions
How big is the 24 volt power supply PCB?
It measures 75 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 24 volt power supply use?
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 24 volt power supply KiCad files?
From the wish4snow/fire-switch-for-light-switch repository on GitHub, at the commit this page was made from: the board is 24_volt_power_supply/24_volt_power_supply.kicad_pcb and its schematic 24_volt_power_supply/24_volt_power_supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 24 volt power supply design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).