

Front panel
Music center based on Hyundai H-MS1110 platform
- Size
- 253 × 38.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 50
- Pads
- 228
- Tracks, vias
- 886, 51
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Dec 2019
- Updated
- 25 Jan 2025
Overview
Front panel is an open-source printed circuit board by WiseLord, from the WiseLord/h-ms1110 repository on GitHub. It is a 2-layer board of 253 × 38.5 mm with 59 parts on 50 nets, routed with 886 tracks and 51 vias.
It is built around the AMS1117-3.3, TSOP4538 and SS14. Its parts include 16 capacitors, 14 resistors, 11 connectors, 9 switches and 4 ICs. It belongs with the STM32 boards of this library.
Main components
3AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTSOP4538
插件-25℃~+85℃ 2.5V~5.5V 38kHz 45m 700uA 插件 Infrared Remote Receiver (IRM) ROHSVishay IntertechnologyInfrared Remote Receiver (IRM)SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12, C13, C14, C17, C18, C19, C20 |
| 5 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R18, R19, R20, R21 |
| 4 | 33k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10, R11 |
| 2 | 20p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7 |
| 2 | 22.0 | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C15, C16 |
| 2 | 6p2 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6 |
| 2 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3, U4 |
| 2 | SS14 | Diode_SMD:D_SMA_Handsoldering | D1, D2 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 22k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 3.3V | h-ms1110:CR1220 | BT1 |
| 1 | 32768 | Crystal:Crystal_C38-LF_D3.0mm_L8.0mm_Vertical | Y2 |
| 1 | 47.0 | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C10 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | AUD | Button_Switch_THT:SW_PUSH_6mm | SW10 |
| 1 | CONTROL | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | ENCODER | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | EXT_INPUT | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J5 |
| 1 | FWD | Button_Switch_THT:SW_PUSH_6mm | SW8 |
| 1 | I2C | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | OPN | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | PLA | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | POWER | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | REP | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | REV | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | RST | Button_Switch_THT:SW_PUSH_6mm | SW14 |
| 1 | SPI | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J8 |
| 1 | SSD1322 | h-ms1110:SSD1322_3.12 | J1 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STP | Button_Switch_THT:SW_PUSH_6mm | SW7 |
| 1 | SUB | Button_Switch_THT:SW_PUSH_6mm | SW11 |
| 1 | SWD | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | SYNC | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | TSOP4538 | OptoDevice:Vishay_MOLD-3Pin | U5 |
| 1 | UART | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | USB | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J11 |
More from WiseLord/h-ms1110
2- 2 layers248.5 × 36 mm

- 2 layers99.1 × 99.1 mm

Similar boards
- 4 layers72.6 × 170 mm

OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 2 layers90.2 × 90 mm

Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications
219 parts81MIT - 2 layers55 × 100 mm

- 2 layers40 × 68 mm

MULTIGW
nuclearcat/ESP32ETH
Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
32 parts30LGPL-2.1 - 4 layers44.5 × 22.5 mm

- 4 layers110 × 50 mm

OpenHand v1
AleksaHeler/OpenHand
Our attempt at a prosthetic hand using STM32 microcontroller with custom PCB and mechanics
214 parts13MIT - 2 layers90 × 74 mm

Fsk energymeter
luftaquila/fsk-energymeter
E-Formula electric energy meter for Formula Student Korea
92 parts13 - 4 layers64 × 60 mm

Dronemagnav
ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.
60 parts11
Questions
How big is the Front panel PCB?
It measures 253 × 38.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Front panel use?
59 parts, built around the AMS1117-3.3, TSOP4538 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Front panel KiCad files?
From the WiseLord/h-ms1110 repository on GitHub, at the commit this page was made from: the board is kicad/player/front_panel/front_panel.kicad_pcb and its schematic kicad/amp/front_panel/front_panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Front panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask WiseLord before reusing the design.