Skip to the content
2 layers100 × 100 mmLissajouz, the printed circuit board in 3D

Analog lissajouz figure generator. (i.e. two syncable pseudo sine oscillators)

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
133
Nets
90
Pads
366
Tracks, vias
860, 16
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Aug 2024
Updated
9 Sep 2024

Overview

Lissajouz is an open-source printed circuit board by Windfisch, from the Windfisch/lissajouz repository on GitHub. It is a 2-layer board of 100 × 100 mm with 133 parts on 90 nets, routed with 860 tracks and 16 vias.

It is built around the LM324 and BC547. Its parts include 77 resistors, 15 capacitors, 10 transistors, 4 diodes and 3 ICs.

Main components

2

Parts

133
QtyValueFootprintReferences
30100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10, R11, R14, R16, R18, R23, R24, R28, R29, R30, R33, R35, R37, R40, R41, R43 +14
1710kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4, R7, R13, R21, R22, R25, R32, R42, R44, R50, R60, R70, R71 +1
1210kfootprints:my_poti_Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV12, RV13, RV14
10100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C4, C5, C6, C8, C9, C12, C14, C15
91kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR19, R38, R48, R58, R59, R63, R64, R65, R66
62N7000Package_TO_SOT_THT:TO-92_InlineQ3, Q6, Q7, Q8, Q9, Q10
51nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C7, C10, C11, C13
422kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8, R12, R27, R31
44.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR61, R67, R68, R73
4BC547Package_TO_SOT_THT:TO-92_InlineQ1, Q2, Q4, Q5
4MountingHole_3.2mm_M3MountingHole:MountingHole_3.2mm_M3HOLE1, HOLE2, HOLE3, HOLE4
3470kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR26, R55, R62
3LM324Package_DIP:DIP-14_W7.62mmU1, U2, U3
2100kfootprints:my_poti_Potentiometer_Alpha_RD901F-40-00D_Single_VerticalR15, R34
210kPotentiometer_THT:Potentiometer_Runtron_RM-065_VerticalRV10, RV11
21MegResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR52, R69
21N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3, D4
2220kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR76, R77
247kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR20, R39
250kfootprints:my_poti_Potentiometer_Alpha_RD901F-40-00D_Single_VerticalR17, R36
2LEDLED_THT:LED_D3.0mmD1, D2
2SW_DPDT_x2footprints:switch8x8SW1, SW2
1AudioJack3Connector_Audio:Jack_3.5mm_CUI_SJ1-3535NG_HorizontalJ2
1Barrel_Jackfootprints:myBarrelJackJ1
1LOGOfootprints:windfisch_smallerwf

The 132 most common of 133 parts.

Similar boards

  • 2 layers83.8 × 72.4 mmVoice board, the printed circuit board in 3D

    Voice board

    Windfisch/analog-synth

    A low-cost semimodular analog synthesizer

    131 parts31GPL-3.0
  • 2 layersLSDA paper, the printed circuit board in 3D

    LSDA paper

    DIY-Nabra/dlopper

    A control circuit based on light differentials

    81 parts4BSD-2-Clause
  • 2 layers110 × 100 mmLab Bench PSU, the printed circuit board in 3D

    Lab Bench PSU

    BojanSof/Lab-Bench-PSU

    Laboratory bench power supply with switching preregulator and LDO.

    84 parts1
  • 2 layers55 × 485 mmFg lampe, the printed circuit board in 3D

    Fg lampe

    devtal-de/fg_lampe

    181 parts1
  • 2 layers113.5 × 78.7 mmMains Control, the printed circuit board in 3D

    Mains Control

    Mounith-H/Mains-Cutoff-Circuit

    A hardware circuit designed to automatically disconnect mains power during overvoltage (>270V) or undervoltage (<170V) conditions to protect appliances.

    67 partsMIT
  • 2 layers43.2 × 111.8 mmNoise, the printed circuit board in 3D

    Noise

    spielhuus/elektrophon

    Modular analog electro acoustic noise machine.

    46 parts32
  • 2 layers100 × 100 mmCmos rungler, the printed circuit board in 3D

    Cmos rungler

    masonandrewmann/modular-synth-pcbs

    these are some pcbs :~)

    69 parts1

Questions

How big is the Lissajouz PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lissajouz use?

133 parts, built around the LM324 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lissajouz KiCad files?

From the Windfisch/lissajouz repository on GitHub, at the commit this page was made from: the board is lissajouz.kicad_pcb and its schematic lissajouz.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lissajouz design in my own project?

Its repository states no licence, so its author keeps all rights: ask Windfisch before reusing the design.