
Windbird fox electronics
windbird-sensor/windbird-fox-electronics
This repository contains the electronic parts of the Windbird wind sensor.

This repository contains the electronic parts of the Windbird wind sensor.
Windbird main template is an open-source printed circuit board by windbird-sensor, from the windbird-sensor/windbird-fox-electronics repository on GitHub. It is a 2-layer board of 76 × 29 mm with 2 parts on 4 nets.
Its parts include 1 diode and 1 switch. It belongs with the sensors and measurement boards of this library.
This repository contains the electronic parts of the Windbird wind sensor.

The development branch is named 'main'
Releases : https://github.com/windbird-sensor/windbird-fox-electronics/releases
To collaborate, initiate the project with:
git clone https://github.com/windbird-sensor/windbird-electronics
To share changes:
git pull --rebase origin main
git push origin main
If you added tags (git tag TAG COMMIT) do the push with:
git push origin main --tags
Copyright (c) 2015 Bac Plus Zéro SAS
Copyright (c) 2016 Altostratus SA
Copyright (c) 2021-2023 OpenWindMap SCIC SA and contributors
Permission is granted to anyone to use this Material for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:
ATTRIBUTION: You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
SHARE-ALIKE: If you remix, transform, or build upon the Material, you must distribute your contributions under the same license as the original. You must include a copy of this License with every copy of this Material or modified version of this Material You distribute or otherwise make available.
OBLIGATION TO SHARE WITHIN THE OPENWINDMAP NETWORK: If you use this Material or a modified version of this Material to build a product that collects environmental data, this data must be published within the OpenWindMap network. You must not intentionally degrade the quality of the data, reduce the accuracy of its geolocation or delay its dissemination.
OPEN-DATA: If you use this Material or a modified version of this Material to build a product that collects environmental data, this data should be published under an Open-Data license. The chosen license must allow free reuse and redistribution, including from commercial entities and for commercial use. The choosen license must either be compliant with the Open Definition or receive approval from OpenWindMap's board. You are allowed to offer a version of this data under any other license of your choice (including non-free licenses), as long as you also provide an identical version of this data under an Open-Data license as defined in this paragraph.
DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: OpenWindMap and its contributors have no obligation to support this Material. OpenWindMap and its contributors are providing this Material "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.
OpenWindMap and its contributors will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Material.
For the avoidance of doubt, OpenWindMap may offer this Material under separate terms or conditions or stop distributing this Material at any time; however, doing so will not terminate this License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1571300-2 | 1571300 | SW1 |
| 1 | LED_3mm | LTL1led | D1 |

windbird-sensor/windbird-fox-electronics
This repository contains the electronic parts of the Windbird wind sensor.

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 76 × 29 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the windbird-sensor/windbird-fox-electronics repository on GitHub, at the commit this page was made from: the board is main/windbird_main_template.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask windbird-sensor before reusing the design.