Skip to the content
2 layers114.3 × 50.8 mmTeensy to autodriver, the printed circuit board in 3D

A simple PCB for connecting the Teensy3.2 to the Sparkfun Autodriver.

Size
114.3 × 50.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
59
Pads
94
Tracks, vias
91, 0
Routed
Yes
KiCad
KiCad 4
Created
11 Jan 2018
Updated
28 May 2019

Overview

Teensy to autodriver is an open-source printed circuit board by willdickson, from the willdickson/teensy_to_autodriver repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 114.3 × 50.8 mm with 12 parts on 59 nets, routed with 91 tracks and 0 vias.

Its parts include 7 connectors and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

README

README.md

teensy_to_autodriver

A simple PCB for connecting the Teensy3.2 to the Sparkfun Autodriver.

Top View:

top_view

Bottom View:

bot_view

License:

Creative Commons Attribution 4.0 International CC BY 4.0

Parts

12
QtyValueFootprintReferences
4PIN_ARRAY_2X1BNC:BNCJ3, J4, J5, J6
4VAL**arduino_nano:MOUNT_HOLE_4_40M0, M1, M2, M3
1PIN_ARRAY_3X1HEADER_3X1:HEADER_3X1J7
1PIN_ARRAY_3X23X2_SHRD_HEADER:3X2_SHRD_HEADERJ2
1PIN_ARRAY_5X25X2_SHRD_HEADER:5X2_SHRD_HEADERJ1
1TEENSY3.1TEENSY3X:TEENSY3XU1

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Teensy to autodriver PCB?

It measures 114.3 × 50.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Teensy to autodriver use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Teensy to autodriver KiCad files?

From the willdickson/teensy_to_autodriver repository on GitHub, at the commit this page was made from: the board is teensy_to_autodriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Teensy to autodriver design in my own project?

Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).