
Pathint arena stim grid
willdickson/pathint_arena_3x3_stim_grid
A PCB for providing light based food stimulus to a 3x3 grid of walking arenas.

A PCB for providing light based food stimulus to a 3x3 grid of walking arenas.
Pathint arena stim grid is an open-source printed circuit board by willdickson, from the willdickson/pathint_arena_3x3_stim_grid repository on GitHub. It is a 2-layer board of 254 × 254 mm with 23 parts on 25 nets, routed with 191 tracks and 13 vias.
Its parts include 18 diodes and 1 connector.
A PCB for providing light based food stimulus to a 3x3 grid of walking arenas.

Creative Commons Attribution 4.0 International CC BY 4.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | ARENA_LED | ARENA_ELEM:SUB_ARENA | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 4 | 0P25_THRU_HOLE | 0P25_THRU_HOLE:0P25_THRU_HOLE | M1, M2, M3, M4 |
| 1 | conn_2x13_odd_even | 13X2_SHRD_HEADER:5X2_SHRD_HEADER | J1 |

willdickson/pathint_arena_3x3_stim_grid
A PCB for providing light based food stimulus to a 3x3 grid of walking arenas.


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards






Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
It measures 254 × 254 mm and has 2 copper layers, 1.6 mm thick.
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the willdickson/pathint_arena_3x3_stim_grid repository on GitHub, at the commit this page was made from: the board is round_2_led/pathint_arena_stim_grid.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask willdickson before reusing the design.