
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A simple PCB for connecting an Arduino (Teensy or Nano) to the Adafruit TLC5947 PWM LED Driver. In progress.
Mcu to tlc5947 is an open-source printed circuit board by willdickson, from the willdickson/mcu_to_tlc5947 repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 152.4 × 76.2 mm with 14 parts on 100 nets, routed with 489 tracks and 18 vias.
Its parts include 8 connectors and 2 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
A simple PCB for connecting an Arduino (Teensy or Nano) to the Adafruit TLC5947 PWM LED Driver. In progress.


Creative Commons Attribution 4.0 International CC BY 4.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | VAL** | MOUNT_HOLE_4_40:MOUNT_HOLE_4_40 | M1, M2, M3, M4 |
| 2 | conn_1x24 | BLOCK_CONN_24:BLOCK_CONN_2X1 | J7, J8 |
| 2 | conn_2x5_odd_even | 5X2_SHRD_HEADER:5X2_SHRD_HEADER | J5, J6 |
| 1 | Adafruit_TLC5947 | Adafruit_TLC5947:Adafruit_TLC5947 | U2 |
| 1 | TEENSY3.1 | Teensy3x:TEENSY3X | U1 |
| 1 | conn_1x2 | BLOCK_CONN_2:BLOCK_CONN_2X1 | J1 |
| 1 | conn_1x3 | PIN_ARRAY_1X3:PIN_ARRAY_1X3 | J2 |
| 1 | conn_2x13_odd_even | 13X2_SHRD_HEADER:5X2_SHRD_HEADER | J3 |
| 1 | conn_2x3_odd_even | 3X2_SHRD_HEADER:3X2_SHRD_HEADER | J4 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 152.4 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the willdickson/mcu_to_tlc5947 repository on GitHub, at the commit this page was made from: the board is teensy/mcu_to_tlc5947.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).