
Led ring
willdickson/magneto_ir_led_ring
PCB with ring of IR LEDs for magno tether rig.

PCB with ring of IR LEDs for magno tether rig.
Led ring is an open-source printed circuit board by willdickson, from the willdickson/magneto_ir_led_ring repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 25.4 × 31.8 mm with 17 parts on 14 nets, routed with 54 tracks and 1 via.
Its parts include 12 diodes, 2 resistors and 1 connector.
PCB with ring of IR LEDs for backlighting rig with magnetic tether.



Creative Commons Attribution 4.0 International CC BY 4.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 2 | 75 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | MOUNT_HOLE_4-40 | mount_hole_4-40:MOUNT_HOLE_4-40 | M1, M2 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |

willdickson/magneto_ir_led_ring
PCB with ring of IR LEDs for magno tether rig.



hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…


It measures 25.4 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the willdickson/magneto_ir_led_ring repository on GitHub, at the commit this page was made from: the board is resistors_15V/led_ring.kicad_pcb and its schematic resistors_15V/led_ring.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).