

Aquarium
- Size
- 150 × 150 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 71
- Pads
- 162
- Tracks, vias
- 340, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Aug 2021
- Updated
- 21 Dec 2022
Overview
Aquarium is an open-source printed circuit board by whsMCU, from the whsMCU/Aquarium repository on GitHub. It is a 2-layer board of 150 × 150 mm with 41 parts on 71 nets, routed with 340 tracks and 26 vias.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13, H14, H15, H16 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 2 | Conn_01x20_Female | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J8, J9 |
| 1 | 220VAC | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J16 |
| 1 | Button Board | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J21 |
| 1 | Buzzer | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Relay Board | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | Relay1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J17 |
| 1 | Relay1_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J12 |
| 1 | Relay2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J19 |
| 1 | Relay2_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J13 |
| 1 | Relay3 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J18 |
| 1 | Relay3_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J14 |
| 1 | Relay4 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J20 |
| 1 | Relay4_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J15 |
| 1 | SDIO Card | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | TDS Sensor | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | TEMP Sensor | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J11 |
| 1 | TFT_LCD | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J10 |
| 1 | Ultra Sonic Sensor | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
Similar boards
- 2 layers70 × 35 mm

- 2 layers270 × 11 mm

Daylight Disco
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
41 parts1.1kGPL-3.0 - 2 layers27.5 × 48.3 mm

ICE40DevBoard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
41 parts915 - 2 layers45 × 25 mm

Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
41 parts599 - 2 layers97 × 78.5 mm

Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
41 parts517GPL-2.0 - 2 layers96.1 × 78.6 mm

EYEBROW WARNING INDICATOR LEFT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
41 parts431 - 2 layers37 × 15 mm

- 2 layers20.3 × 69.7 mm

PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
41 parts276CERN-OHL-S-2.0
Questions
How big is the Aquarium PCB?
It measures 150 × 150 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Aquarium use?
41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aquarium KiCad files?
From the whsMCU/Aquarium repository on GitHub, at the commit this page was made from: the board is Aquarium_PCB/Aquarium.kicad_pcb and its schematic Aquarium_PCB/Aquarium.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aquarium design in my own project?
Its repository states no licence, so its author keeps all rights: ask whsMCU before reusing the design.