Skip to the content
2 layers76 × 50.8 mmLED test board v0.1, the printed circuit board in 3D
Size
76 × 50.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
259
Nets
123
Pads
381
Tracks, vias
858, 264
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
18 May 2018
Updated
22 May 2018

Overview

LED test board v0.1 is an open-source printed circuit board by wheeler-microfluidics, from the wheeler-microfluidics/LED-test-board.kicad repository on GitHub. It is a 2-layer board of 76 × 50.8 mm with 259 parts on 123 nets, routed with 858 tracks and 264 vias.

Its parts include 137 connectors, 120 capacitors, 1 resistor and 1 diode.

Parts

259
QtyValueFootprintReferences
136CONN_01X01wheelerlab:1.9mm_DMF_ElectrodeP1, P10, P11, P100, P101, P102, P103, P104, P105, P106, P107, P108, P109, P110, P111, P112 +120
120CLEDs:LED_0805C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +104
1CONN_01X01Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mmP121
1RResistors_SMD:R_1206R2
1SMB5949WheelerLab:SMB5949D1

Similar boards

  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers97 × 97 mmPCBA ZONA LED, the printed circuit board in 3D

    PCBA ZONA LED

    intechstudio/grid-hardware

    259 parts59GPL-3.0
  • 2 layers100 × 70 mmRTD2662Board, the printed circuit board in 3D

    RTD2662Board

    KerJoe/RTD2662Board

    Prototype board for RTD2662 display controller

    259 parts24
  • 2 layers285 × 94.6 mmKeyboard, the printed circuit board in 3D

    Keyboard

    andrewcchen/blu60

    259 parts20
  • 2 layers100 × 100 mmTrv, the printed circuit board in 3D

    Trv

    Polski-Zwiazek-Krotkofalowcow/qo-100-transverter

    Auxiliary unit for the QO-100 transverter, providing:

    259 parts11
  • 2 layers478 × 183 mmHC2000, the printed circuit board in 3D

    HC2000

    badrianiulian/HC2000

    HC2000 Project

    259 parts9
  • 2 layers100 × 100 mmHdmilight v3, the printed circuit board in 3D

    Hdmilight v3

    esar/hdmilight-v3

    HDMI Light v3 - FPGA based Ambilight clone with direct HDMI input

    259 parts8GPL-2.0
  • 2 layers263.1 × 80.5 mm4x12, the printed circuit board in 3D

    4x12

    gargum/4x12-Tentacle

    The very first device to use the SquidHID firmware

    259 parts7

Questions

How big is the LED test board v0.1 PCB?

It measures 76 × 50.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED test board v0.1 use?

259 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED test board v0.1 KiCad files?

From the wheeler-microfluidics/LED-test-board.kicad repository on GitHub, at the commit this page was made from: the board is LED-test-board-v0.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED test board v0.1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask wheeler-microfluidics before reusing the design.