Skip to the content
2 layers15.5 × 27.7 mmRing ir prog probe, the printed circuit board in 3D

Ring ir prog probe

whatnick/lantern_ring3

Lantern Corps Style Ring, SW/HW/Jewellery Design

Size
15.5 × 27.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
8
Pads
16
Tracks, vias
22, 2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Nov 2021
Updated
7 Nov 2026

Overview

Ring ir prog probe is an open-source printed circuit board by whatnick, from the whatnick/lantern_ring repository on GitHub. It is a 2-layer board of 15.5 × 27.7 mm with 11 parts on 8 nets, routed with 22 tracks and 2 vias.

It belongs with the sensors and measurement boards of this library.

README

hardware/v2.0/ring_mono/README.md

Lantern Ring Mono PCB

Production boards use 0.8 mm FR-4, 1 oz copper, and lead-free HASL. Each assembled variant fits the same LED MPN at D1-D6; TP1 and TP2 are copper contacts and are not fitted components.

VariantLED MPNSolder maskSilkscreen
White / LifeIN-S126ASUWWhiteBlack
UV / DeathSM1206UV-400-ILBlackWhite
Red / RageAPTL3216SURCKRedWhite
Orange / AvariceAPTL3216SECK-01YellowBlack
Yellow / FearAPTL3216SYCKYellowBlack
Green / WillAPTD3216MGCGreenWhite
Blue / HopeAPT3216QBC/DBlueWhite
Indigo / CompassionAPTR3216-VFXPurpleWhite
Pink / LoveAPT3216PBC/RVPurpleWhite
Invisible / InfraredAP3216F3CBlackWhite

Orange, indigo, pink, and infrared use the closest available PCB colors. Confirm exact LED substitutions and fabrication colors before production.

Parts

11
QtyValueFootprintReferences
2M2_Slot_Clip_Jawring_ir_prog_clip:M2_Slot_Clip_JawH1, H2
1AVR_ISP_6_SMDConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMDJ1
1GND_lead_to_anvilTestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mmJ2
1Pogo TP1 PB0ring_ir_prog_clip:Pogo_P75_THTP1
1Pogo TP2 PB1ring_ir_prog_clip:Pogo_P75_THTP2
1Pogo TP3 PB2ring_ir_prog_clip:Pogo_P75_THTP3
1Pogo TP4 PB3ring_ir_prog_clip:Pogo_P75_THTP4
1Pogo TP5 PB4ring_ir_prog_clip:Pogo_P75_THTP5
1Pogo TP6 PB5ring_ir_prog_clip:Pogo_P75_THTP6
1Pogo TP9 VCCring_ir_prog_clip:Pogo_P75_THTP9

More from whatnick/lantern_ring

5
  • 4 layers17.8 × 19 mmRing motion rgb, the printed circuit board in 3D

    Ring motion rgb

    whatnick/lantern_ring

    Lantern Corps Style Ring, SW/HW/Jewellery Design

    22 parts3
  • 2 layers17.5 × 19.1 mmRing pcb IR, the printed circuit board in 3D

    Ring pcb IR

    whatnick/lantern_ring

    Lantern Corps Style Ring, SW/HW/Jewellery Design

    22 parts3
  • 2 layers17.8 × 17.8 mmRing pcb, the printed circuit board in 3D

    Ring pcb

    whatnick/lantern_ring

    Lantern Corps Style Ring, SW/HW/Jewellery Design

    18 parts3
  • 2 layers17.8 × 19 mmRing mono, the printed circuit board in 3D

    Ring mono

    whatnick/lantern_ring

    Lantern Corps Style Ring, SW/HW/Jewellery Design

    8 parts3
  • 2 layers19.1 × 19 mmRing pcb dotstar, the printed circuit board in 3D

    Ring pcb dotstar

    whatnick/lantern_ring

    Lantern Corps Style Ring, SW/HW/Jewellery Design

    2 parts3

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Ring ir prog probe PCB?

It measures 15.5 × 27.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ring ir prog probe use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ring ir prog probe KiCad files?

From the whatnick/lantern_ring repository on GitHub, at the commit this page was made from: the board is hardware/v2.0/ring_ir_prog_clip/probe/ring_ir_prog_probe.kicad_pcb and its schematic hardware/v1.0/ring_pcb/ring_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ring ir prog probe design in my own project?

Its repository states no licence, so its author keeps all rights: ask whatnick before reusing the design.