Skip to the content
2 layers90.7 × 91.6 mmKim1breakout, the printed circuit board in 3D

Passive breakout Board for the KIM-1 Application and Expansion connector

Size
90.7 × 91.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
44
Pads
132
Tracks, vias
371, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Apr 2024
Updated
17 Oct 2024

Overview

Kim1breakout is an open-source printed circuit board by wfd3, from the wfd3/KIM1-breakout-board repository on GitHub, published under the MIT licence. It is a 2-layer board of 90.7 × 91.6 mm with 3 parts on 44 nets, routed with 371 tracks and 0 vias.

It belongs with the retro computing and games and interfaces and adapters boards of this library.

README

README.md

PCB

This is a very simple passive breakout extension for the KIM-1 computer. It attaches to either the Application or Expansion connector on the KIM-1 and brings the signals out to a standard 2x22 pin header, as well to an edge connector on the other side of the PCB. This allows easy intergration with a breadboard for prototyping, or debugging the data flow between the KIM-1 and an external board.

The edge connector is intended to accept a Dual Edge Connector from EDIC (part no. 305-044-500-202), and the pin header is designed for standard 2.45mm pitch pins.

Parts

3
QtyValueFootprintReferences
1Conn_01x44kim1-connectors:pcb_slot_connector_02x22_rightJ2
1Conn_01x44kim1-connectors:pcb_slot_connector_02x22_leftJ1
1Conn_02x22_Top_Bottomkim1-connectors:PinHeader_2x22_P2.54_Vertical_KIM1J3

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

How big is the Kim1breakout PCB?

It measures 90.7 × 91.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kim1breakout use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kim1breakout KiCad files?

From the wfd3/KIM1-breakout-board repository on GitHub, at the commit this page was made from: the board is kim1breakout.kicad_pcb and its schematic kim1breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kim1breakout design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).