
Desktop 50 Pin TopConn
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

Promoting student-led design, verification, and implementation of user-defined hardware.
Board1 is an open-source printed circuit board by weyer7, from the weyer7/Purdue-FPGA-Club repository on GitHub. It is a 2-layer board of 99.1 × 124.5 mm with 105 parts on 301 nets, routed with 3,874 tracks and 198 vias.
It is built around the 74HC14 and TDSR1060. Its parts include 20 switches, 16 capacitors, 9 connectors, 4 ICs and 3 resistors.
Promoting student-led design, verification, and implementation of user-defined hardware.
For Spring 2025, the club offers the following two project paths:
For questions, feel free to reach out to FPGA Club officers via the Discord.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | SW_Push | Rick_Footprints:SW_SPST_B3FS-4052P | SW0, SW1, SW2, SW3, SW4, SW5, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19 +4 |
| 16 | LED_ALT | LED_THT:LED_D3.0mm | LF0, LF1, LF2, LF3, LF4, LF5, LF6, LF7, RT0, RT1, RT2, RT3, RT4, RT5, RT6, RT7 |
| 15 | 1.5K | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | RN1, RN2, RN3, RN10, RN11, RN12, RN13, RN14, RN15, RN16, RN17, RN18, RN19, RN20, RN21 |
| 8 | tdsr1060 | Package_DIP:DIP-10_W7.62mm | SS0, SS1, SS2, SS3, SS4, SS5, SS6, SS7 |
| 6 | .1uF | Resistor_SMD:R_Array_Convex_4x0612 | C7, C8, C9, C10, C11, C12 |
| 6 | 100K | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | RN4, RN5, RN6, RN7, RN8, RN9 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6 |
| 4 | .1uF | Capacitor_SMD:C_0603_1608Metric | C31, C32, C33, C34 |
| 4 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3, U4 |
| 4 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical_SMD | J1, J2, J3, J4 |
| 2 | 200 | Resistor_SMD:R_0805_2012Metric | R75, R76 |
| 1 | |||
| 1 | 240 | Resistor_SMD:R_0805_2012Metric | R78 |
| 1 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Left | J7 |
| 1 | Conn_02x02_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical_SMD | J8 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J10 |
| 1 | Conn_02x10_Odd_Even | Connector_Samtec_HLE_SMD:Samtec_HLE-110-02-xxx-DV_2x10_P2.54mm_Horizontal | J5 |
| 1 | Conn_02x12_Odd_Even | Connector_Samtec_HLE_SMD:Samtec_HLE-112-02-xxx-DV_2x12_P2.54mm_Horizontal | J6 |
| 1 | LED_RCBG | LED_THT:LED_D5.0mm-4_RGB | D1 |
The 99 most common of 105 parts.

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

keirf/pcb-projects
The old Kickstart switcher documentation is here.

anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

nicolacimmino/PLC-14500
Retro trainer board based on the MC14500 1-bit ICU. The project is OSHW certified and a ready to assemble kit is available on Tindie.


transistorfet/computie
A collection of 68k computer projects, including a unix-like operating system written in C that runs on them

sbstnh/programmable_precision_resistor
A SCPI programmable precision resistor

It measures 99.1 × 124.5 mm and has 2 copper layers, 1.6 mm thick.
105 parts, built around the 74HC14 and TDSR1060. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the weyer7/Purdue-FPGA-Club repository on GitHub, at the commit this page was made from: the board is ECE270-board3/board1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask weyer7 before reusing the design.