2 layers41.4 × 47.5 mm
U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k
2 layers30.5 × 49.5 mm
WarthoggitClone
Wetmelon/WarthoggitCloneClone of the Warthoggit Joystick PCB
- Size
- 30.5 × 49.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 38
- Pads
- 158
- Tracks, vias
- 201, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Dec 2018
- Updated
- 28 Dec 2018
Overview
WarthoggitClone is an open-source printed circuit board by Wetmelon, from the Wetmelon/WarthoggitClone repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30.5 × 49.5 mm with 52 parts on 38 nets, routed with 201 tracks and 41 vias.
It is built around the HCF4021BE. Its parts include 31 resistors, 12 connectors, 3 capacitors and 3 ICs. It belongs with the keyboards and input boards of this library.
Main components
1README
README.mdWarthoggitClone
Clone of the Warthoggit Joystick PCB
2-Layer
- Octopart BOM: https://octopart.com/bom-tool/HYrWh7Pe
- OSHPark PCB: https://oshpark.com/shared_projects/x2CpRCvp
- Gerblook: http://gerblook.org/pcb/NEAhkPDx7kaQgrBpLWPrQZ
4-Layer
- Octopart BOM: https://octopart.com/bom-tool/o3ovRzzJ
- OSHPark PCB: https://oshpark.com/shared_projects/Q2SqhzfM
- Gerblook: http://gerblook.org/pcb/AL6aAQwq3UeULmAeNpxRJG
Info
Uses three cascaded 8-bit parallel-to-serial shift registers, with the final downstream output hooked to an SPI MISO line. The whole stack is clocked by the SPI CLK and latched by SPI CS. This variant uses automotive qualified parts to withstand the vibrations expected in a joystick.
- STM HCF4021
- Panasonic 0805 package 10k ohm resistors (can be replaced with 100k if debouncing is an issue)
- 100nF 0805 capacitors, ceramic, X7R
Original Reddit Post:
https://www.reddit.com/r/hoggit/comments/46pdjy/warthoggit_pcb_series_the_circuitboard_for_your/
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R11, R12, R13, R14, R15, R16, R17, R18, R20, R21, R22, R23, R24, R25 +15 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 3 | HCF4021 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1, U2, U3 |
| 3 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3 |
| 1 | BASE | Wetmelon:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J8 |
| 1 | CMS | Wetmelon:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J9 |
| 1 | CMS_DOWN | Wetmelon:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J5 |
| 1 | DMS | Wetmelon:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J10 |
| 1 | HAT | Wetmelon:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J12 |
| 1 | PINKY_BUTTON | Wetmelon:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J7 |
| 1 | PINKY_LEVER | Wetmelon:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J4 |
| 1 | TMS | Wetmelon:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J11 |
| 1 | TOP_RIGHT_SIDE | Wetmelon:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J3 |
| 1 | TRIGGER_1 | Wetmelon:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J6 |
| 1 | TRIGGER_2 | Wetmelon:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J1 |
| 1 | WEAPON_RELEASE | Wetmelon:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J2 |
Questions
How big is the WarthoggitClone PCB?
It measures 30.5 × 49.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WarthoggitClone use?
52 parts, built around the HCF4021BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WarthoggitClone KiCad files?
From the Wetmelon/WarthoggitClone repository on GitHub, at the commit this page was made from: the board is 2-Layer/WarthoggitClone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WarthoggitClone design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers136 × 130 mm
Lora nodemcu
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
52 parts1.1k - 2 layers69 × 53.8 mm
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
52 parts530 - 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers105.2 × 42.4 mm
- 2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
52 parts379Apache-2.0 - 2 layers160 × 99.1 mm
Ardumower mega shield V1.00
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
52 parts282 - 2 layers53 × 23 mm
Maam 011109 bias
loxodes/vna
Under development open hardware microwave vector network analyzer
52 parts205