2 layers102 × 85 mm
Superflat
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
94 parts915
2 layers242.9 × 83.7 mm
DigDug
weteor/DigDug2645 keys orthogonal keyboard with exploded key groups
- Size
- 242.9 × 83.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 66
- Pads
- 442
- Tracks, vias
- 533, 81
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Feb 2023
- Updated
- 5 Feb 2023
Overview
DigDug is an open-source printed circuit board by weteor, from the weteor/DigDug repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 242.9 × 83.7 mm with 94 parts on 66 nets, routed with 533 tracks and 81 vias.
Its parts include 45 diodes, 45 switches and 2 connectors. It belongs with the keyboards and input boards of this library.
README
README.mdDigDug
45 keys orthogonal keyboard with 'exploded' key groups
Features
- MX switches w/ hotswap
- Seeed Xiao RP2040 or Seeed Xiao BLE Controller on an Orthocade MCU board
- case files are supplied (stl, dxf, as well as the freecad files)
- support for ZMK firmware (Xiao BLE) or QMK w/vial (Xiao RP2040)
- completely open source, permissive license
- bottom rows supported:
- 6.25u
- 2.25u - 1.75u - 2.25u
Want one?
All production files you need to build your own board can be found here.
Gerber files as well as files needed for 3d printing are provided. Please note that the case design that supports the acryl layin may not be SLN printable. Please print them either in resin or nylon. I've used JLCPCBs printing service (black resin) and it turned out very good, so maybe take a look at that option.
Parts needed beside the MCU board and pcbs:
-
a 20pin 0.5mm pitch FCC/FCP Connector
-
45 mx hotswap sockets
-
45 1N4148 diodes in SOT-123 package
-
45 of your favourite switches
the rest
Everything in this repository is free to use however you might see fit. If you want to support me and my projects, please consider linking back to this repository if you build/change/use anything.
If you would like to send me a tip, you could do it here (Please don't feel like you have to).
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | D | weteor:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +29 |
| 42 | SW_Push | weteor:CherryMX_Hotswap | SW1, SW2, SW3, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW23, SW24, SW25, SW30 +26 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_Push | weteor:CherryMX_Hotswap_2.25u_stabs | SW19, SW33 |
| 1 | Conn_01x05 | weteor:FCC 5pin | J1 |
| 1 | Conn_01x20 | weteor:FCC 20pin | J2 |
| 1 | SW_Push | weteor:CherryMX_Hotswap_1.75u | SW26 |
Questions
How big is the DigDug PCB?
It measures 242.9 × 83.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DigDug use?
94 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DigDug KiCad files?
From the weteor/DigDug repository on GitHub, at the commit this page was made from: the board is pcb/digdug.kicad_pcb and its schematic pcb/digdug.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DigDug design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers58 × 71 mm
MLX90640-allsky
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
94 parts208 - 2 layers45.2 × 146.8 mm
- 2 layers62.3 × 64.3 mm
- 2 layers180 × 160 mm
- 2 layers145.7 × 107.8 mm
TRS IO++
apuder/TRS-IO
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
94 parts75GPL-3.0 - 2 layers49.6 × 37.2 mm
- 2 layers65 × 40 mm
