Skip to the content
2 layers134.6 × 38.1 mmSeqboard variant, the printed circuit board in 3D

MIDIbox SEQ V4 Build

Size
134.6 × 38.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
40
Pads
147
Tracks, vias
223, 14
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
24 Feb 2016
Updated
10 Nov 2021

Overview

Seqboard variant is an open-source printed circuit board by westlicht, from the westlicht/midibox-seq-v4 repository on GitHub. It is a 2-layer board of 134.6 × 38.1 mm with 41 parts on 40 nets, routed with 223 tracks and 14 vias.

It is built around the NMH0512SC and ENC28J60-I/SP. Its parts include 16 capacitors, 7 resistors, 6 connectors, 4 ICs and 1 inductor.

Main components

2

README

README.md

midibox-seq-v4

Rendering

This repository contains some documentation and data created during the build process of a MIDIBox SEQ V4. Please note that I'm not the original author of the project. The original project is hosted at http://ucapps.de

MIDIbox PCBs

I ordered the PCBs from http://midiboxshop.bigcartel.com

Here is the list:

Parts

I ordered the parts from TME, Reichelt, DigiKey and Mouser. Sourcing the parts is a little painful. In addition, for some parts there are a few (or many) options. The following are a few notes on the parts I've chosen for the build:

Custom PCB

As I wanted to have nice backpanel as well as Ethernet support, I designed a PCB with the following additional features:

The PCB was designed in KiCad and produced by OSH Park. The PCB is available here. Feel free to order your own!

Here is the bill of materials:

PartDescriptionSupplier
C1, C4, C5, C6, C8, C9, C10, C11, C14, C15Ceramic Capacitor 100 nF
C2, C3Ceramic Capacitor 18 pF
C7Tantal Capacitor 10 uF
C12, C16Polarized Capacitor 47 uF
C13Polarized Capacitor 100 uF
R1Resistor 2.32 kOhm
R2, R3, R4, R5Resistor 49.9 Ohm
R6, R7Resistor 220 Ohm
L1Ferrit Bead 10 uHReichelt
Y1Crystal 25 MHzReichelt
IC1ENC28J60-I/SP DIPDigiKey
P1USB B connectorTODO
U13M SD-RSMT-2-MQMouser
U2NMH0512SC (datasheet)Reichelt
U3Pulse J0026D21EMouser

Frontpanel / Case

Frontpanel

Backpanel

The frontpanel is based on the Wilba frontpanel. I only adjusted some of the drillings in addition to moving things around slightly to make sure everything fits within the case. The backpanel was designed from scratch in order to fit nicely with the MIDI I/O PCBs as well as my own PCB. In addition, a DSUB-25 connector is used for the analog bus and a few important analog outputs are available seperatly on 3.5 mm jacks. The rest of the case are just basic aluminium panels and everything is hold together by enclosure profiles. The case can be ordered from Schaeffer AG. All required files are available in the case directory.

Notes

Links

Build Images

Build Build Build Build Build Build Build Build Build Build Build Build Build Build Build Build Build

Parts

41
QtyValueFootprintReferences
10100nFw_capacitors:cnp_3mm_discC1, C4, C5, C6, C8, C9, C10, C11, C14, C15
449.9Resistors_ThroughHole:Resistor_Horizontal_RM7mmR2, R3, R4, R5
218pFw_capacitors:cnp_3mm_discC2, C3
2220Resistors_ThroughHole:Resistor_Horizontal_RM7mmR6, R7
247uFCapacitors_ThroughHole:C_Radial_D5_L6_P2.5C12, C16
2HEADER_2Pin_Headers:Pin_Header_Straight_1x02J4, J5
1100uFCapacitors_ThroughHole:C_Radial_D5_L6_P2.5C13
110uF Tantalw_capacitors:cnp_3mm_discC7
12.32KResistors_ThroughHole:Resistor_Horizontal_RM7mmR1
125MHzCrystals:Crystal_HC49-U_VerticalY1
1ENC28J60-I/SPHousings_DIP:DIP-28_W7.62mm_LongPadsIC1
1HEADER_3Pin_Headers:Pin_Header_Straight_1x03J6
1HEADER_4Pin_Headers:Pin_Header_Straight_1x04J2
1HEADER_5x2Connect:IDC_Header_Straight_10pinsJ1
1INDUCTORDiscret:R5L1
1J0026D21E_J0-A/B/Fpulse-eng:J0-A%2fB%2fFU3
1NMH0512SCcustom:NMH0512SCU2
1SD-SOCKET-3M_SD-SOCKET-3Msd-socket:SD-SOCKET-3MU1
1USB_BConnect:USB_BP1

The 35 most common of 41 parts.

Similar boards

  • 2 layers100 × 80 mmScuznet, the printed circuit board in 3D

    Scuznet

    saybur/scuznet

    Open source hardware emulating a SCSI to Ethernet adapter.

    103 parts39GPL-3.0
  • 2 layers99.1 × 85.1 mmMain Brd, the printed circuit board in 3D

    Main Brd

    bluebandit21/magic-wifi

    A method to connect two devices using Pseudo-Ethernet over long distance LoRa and WiFi

    64 parts5GPL-3.0
  • 2 layers272.7 × 159.6 mmFab, the printed circuit board in 3D

    Fab

    horazont/hint

    Home Information Terminal — a multi-part system providing sensor and other information

    170 parts2
  • 2 layersLed strip, the printed circuit board in 3D

    Led strip

    badly-drawn-wizards/led-strip

    Ethernet controlled WS2812 RGB led-strip

    32 parts
  • 2 layersATMEGA 32 1, the printed circuit board in 3D

    ATMEGA 32 1

    ernest-czachorowski/Flood-Sensors-KiCad-Files

    This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.

    74 partsMIT
  • 2 layers70 × 35 mmTLF35584 breakout, the printed circuit board in 3D

    TLF35584 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    41 parts1.2k
  • 2 layers270 × 11 mmDaylight Disco, the printed circuit board in 3D

    Daylight Disco

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    41 parts1.1kGPL-3.0
  • 2 layers27.5 × 48.3 mmICE40DevBoard, the printed circuit board in 3D

    ICE40DevBoard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    41 parts915

Questions

How big is the Seqboard variant PCB?

It measures 134.6 × 38.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Seqboard variant use?

41 parts, built around the NMH0512SC and ENC28J60-I/SP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Seqboard variant KiCad files?

From the westlicht/midibox-seq-v4 repository on GitHub, at the commit this page was made from: the board is seqboard/seqboard-variant.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Seqboard variant design in my own project?

Its repository states no licence, so its author keeps all rights: ask westlicht before reusing the design.