

Current dr psu
A current drive headphone amplifier
- Size
- 100 × 155 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 53
- Pads
- 239
- Tracks, vias
- 407, 115
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Aug 2020
- Updated
- 26 Feb 2021
Overview
Current dr psu is an open-source printed circuit board by werediver, from the werediver/current-dr-amp repository on GitHub. It is a 2-layer board of 100 × 155 mm with 82 parts on 53 nets, routed with 407 tracks and 115 vias.
It is built around the TL072, LM334M and STPS2L40U, with the BC807-40, BC817-40 and BC847A among its other parts. Its parts include 29 resistors, 18 capacitors, 10 ICs, 8 transistors and 4 diodes. It belongs with the audio and music and power boards of this library.
Main components
7TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierLM334M
SOIC-80℃~+70℃ 10mA 1V~40V Current Source Programmable output current ±6% SOIC-8 Current Source / Constant Current Source ROHSTexas InstrumentsCurrent Source / Constant Current SourceSTPS2L40U
SMB(DO-214AA)1 Independent 220uA@40V 2A 40V 430mV@2A 75A SMB(DO-214AA) Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesBC807-40
SOT-23-65℃~+150℃ 1 PNP 100nA 250 250mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BC817-40
SOT-23-65℃~+150℃ 1 NPN 100MHz 100nA 250 345mW 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BC847A
SOT-23-65℃~+150℃ 1 NPN 100MHz 100mA 110 15nA 250mW 400mV 45V 6V NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BC857A
SOT-23-65℃~+150℃ 1 PNP 100MHz 100mA 125 15nA 250mW 300mV 45V 5V PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
README
README.mdCURRENT DR.
This is a "current drive" or VCCS class A headphone amplifier. Some advocacy of current drive (as well as a whole book on the topic) can be found at current-drive.info.
The first prototype is briefly described on Prototype page.
Schematic
The current version of the schematic is showed below.

Two such channels with a dedicated linear PSU are going to be fit into an extruded aluminum enclosure with internal dimensions of 96x155x50 mm.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R10, R11, R14, R15, R16, R17, R19, R21, R22, R23, R24, R26, R28, R29 +4 |
| 9 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R5, R6, R12, R13, R18, R20, R25, R27 |
| 4 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C7, C11, C15 |
| 4 | 10u | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C6, C10, C14, C18 |
| 4 | 1n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C8, C12, C16 |
| 4 | 20k | Potentiometer_SMD:Potentiometer_Bourns_3224W_Vertical | RV2, RV3, RV4, RV5 |
| 4 | 47n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C9, C13, C17 |
| 4 | STPS2L40U | Diode_SMD:D_SMB_Handsoldering | D1, D2, D3, D4 |
| 4 | TL072 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3, U5, U7, U9 |
| 4 | TS432 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U4, U6, U8, U10 |
| 2 | 10000u | Capacitor_THT:C_Radial_D18.0mm_H35.5mm_P7.50mm | C1, C2 |
| 2 | BC807-40 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q6, Q8 |
| 2 | BC817-40 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2, Q4 |
| 2 | BC847A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q5, Q7 |
| 2 | BC857A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q3 |
| 1 | 0.25A 250V | Custom:FUSE_5x20_Stelvio-Kontek_PTF75 | F1 |
| 1 | 1k | Potentiometer_SMD:Potentiometer_Bourns_3214G_Horizontal | RV1 |
| 1 | AC IN | Connector_Molex:Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | J1 |
| 1 | AP-01, Ohmite | Custom:EMI_FILTER_25x25 | U1 |
| 1 | CS BYPASS | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | DC OUT | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J2 |
| 1 | F mounting hole | MountingHole:MountingHole_2.7mm_Pad_Via | H1 |
| 1 | LM334M | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | POWER ON LED | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | TALEMA 70063K | Custom:TF_60x60 | TR1 |
| 1 | TR mounting hole | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H2 |
More from werediver/current-dr-amp
1- 2 layers100 × 90 mm

Similar boards
- 2 layers91.4 × 40.6 mm

Mhixy
iblue/mhi-xy-bus
Reverse engineering of the Mitsubishi Heavy Industries X/Y Bus as used in FDUM air condition
70 parts6 - 2 layers56 × 54 mm

TheSultan
soggybag/The-Sultan-SMD
Silicon NPN Fuzz Face + SQUINCH (Woolly-style bias) + an active Baxandall tone stack, for JLC assembly.
45 parts - 2 layers100 × 50 mm

OpenPSU
mrkindustries/openPSU
An open source linear power supply unit for hobbyists and professionals
88 parts41 - 4 layers

IONPAK2
m-labs/ionpak
A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)
259 parts23 - 2 layers150 × 80 mm

Rpi extension
andriy-bilynskyy/rpi-extension
This project is a PCB design to create SDR transceiver using Raspberry Pi and Radioberry boards. Simple connection of boards seems incomplete:
97 partsMIT - 4 layers166.3 × 70 mm

Ganglia
H2O-Tnp/ganglia
Ganglia is an open BLDC / brushed motor driver platform — custom PCB hardware plus STM32 firmware that runs a real-time control loop on top of FreeRTOS.
202 parts - 2 layers

IR Schreib Lesekopf RS232 Neu
ju6ge/volkszaehler_ir_pcbs_kicad
Converted Volkszaehler PCB Layouts to KiCAD
24 parts - 2 layers105 × 50 mm

Questions
How big is the Current dr psu PCB?
It measures 100 × 155 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Current dr psu use?
82 parts, built around the TL072, LM334M, STPS2L40U and BC807-40. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Current dr psu KiCad files?
From the werediver/current-dr-amp repository on GitHub, at the commit this page was made from: the board is KiCad/current-dr-psu/current-dr-psu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Current dr psu design in my own project?
Its repository states no licence, so its author keeps all rights: ask werediver before reusing the design.