
SAE Cellular Module
ephrenm/VehiCell
NRF9151-based cellular telemetry device designed for a FSAE EV vehicle.

Mirror of https://git.veltko.de/Weckyy702/diy-router
Diy router is an open-source printed circuit board by Weckyy702, from the Weckyy702/diy-router repository on GitHub. It is a 4-layer board with 90 parts on 168 nets, routed with 964 tracks and 103 vias.
It is built around the HLK-7628N, USB2422T/MJ and XR22801IL32TR-F, with the USBLC6-2SC6Y, EMIF03-SIM02M8 and ABM8-24.000MHZ-B2-T among its other parts. Its parts include 30 capacitors, 22 resistors, 10 connectors, 7 ICs and 3 switches.
DIY Router
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C10, C11, C12, C13, C14, C18, C19, C22, C23, C24, C25, C26, C31, C33 +1 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 5 | 22μF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C6 |
| 4 | 18pF | Capacitor_SMD:C_0603_1608Metric | C16, C17, C20, C21 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R5, R13 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | RJ45_Hanrun_HR911105A_Horizontal | Connector_RJ:RJ45_Hanrun_HR911105A_Horizontal | J2, J3, J4, J7 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R24, R25 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R23 |
| 3 | 50k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R22 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R19 |
| 2 | 436333033816 | WS-TASU:SW_Wurth_WS-TASU_436333033816 | SW1, SW2 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.7mm_Pad_TopBottom | H5, H6 |
| 2 | USBLC6-2SC6Y | Package_TO_SOT_SMD:SOT-23-6 | U2, U3 |
| 1 | 12k 1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 1pF | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | 1µF | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 2041262-1 | TE_2041262:CONN60_2041262-1_TEC | J10 |
| 1 | 2171790001 | 2171790001:MOLEX_2171790001 | J1 |
| 1 | 226 1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 4.7µF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 450405020524 | WS-SLSU:SW_Wurth_WS-SLSU_450405020524 | SW3 |
| 1 | 453k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 470µF | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_HandSolder | C2 |
| 1 | ABM8-24.000MHZ-B2-T | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y2 |
| 1 | ABM8-25.000MHZ-B2-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J6 |
| 1 | EMIF03-SIM02M8 | EMIF03-SIM02M8:SON40P170X150X60-9N | U5 |
| 1 | HLK-7628N | HLK-MT7628N:HLK7628N | IC1 |
| 1 | MGV252010R22M-10 | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | SIM8066-6-1-14-01-A | SIM8066_6:CONN_SIM8066-6-1-14-01-A_GCT | J9 |
| 1 | TPS62A06ADRLR | Package_TO_SOT_SMD:SOT-563 | IC2 |
| 1 | USB2422T/MJ | USB2422T_MJ:SQFN24_4X4MC_MCH | U4 |
| 1 | USB_A | Connector_USB:USB_A_Receptacle_GCT_USB1046 | J8 |
| 1 | XR22801IL32TR-F | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm | U1 |

ephrenm/VehiCell
NRF9151-based cellular telemetry device designed for a FSAE EV vehicle.



Ribbit-Network/ribbit-network-frog-hardware
The sensor for the world's largest crowdsourced network of open-source, low-cost, GHG Gas Detection Sensors.




LZajmi/Artix-7-FPGA-Dev-Board
This repository contains the design files for the custom Artix-7 XC7A100T-FGG484 FPGA development board. This board is built for high-performance applications such as hardware acceleration, video processing, data…
90 parts, built around the HLK-7628N, USB2422T/MJ, XR22801IL32TR-F and USBLC6-2SC6Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Weckyy702/diy-router repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad/DIY_Router.kicad_pcb and its schematic Hardware/KiCad/DIY_Router.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Weckyy702 before reusing the design.