2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0
2 layers24.1 × 18 mm
ETH2GC Lite
webhdx/ETH2GC129Broadband Adapter replacement for Nintendo GameCube
- Size
- 24.1 × 18 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 2
- Nets
- 10
- Pads
- 18
- Tracks, vias
- 41, 11
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Sep 2023
- Updated
- 9 Nov 2025
Overview
ETH2GC Lite is an open-source printed circuit board by webhdx, from the webhdx/ETH2GC repository on GitHub. It is a 2-layer board of 24.1 × 18 mm with 2 parts on 10 nets, routed with 41 tracks and 11 vias.
Its parts include 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.
README
README.mdETH2GC - Broadband Adapter Emulator
Thanks to @Extrems and his work on Swiss we can now use cheap off-the-shelf Ethernet modules to emulate rare and expensive Broadband Adapter for GameCube.
Some of the cool things you can do with ETH2GC:
- Play Mario Kart: Double Dash!! online multiplayer with Kirbymimi's online mod
- Play Phantasy Star Online on private servers like Schthack
- Play all retail GameCube games that came with LAN and Online support
- Dump your discs and game saves via network
- Debug your own homebrew applications
- ...and much more
ETH2GC is a project bringing together various Ethernet adapter hardware variants. The project is actively supported and adding more capable Ethernet drivers is planned.
Visit #eth2gc on:
📚 Documentation
More extensive documentation including ordering and build guides is available at support.webhdx.dev.
🌐 ETH2GC Sidecar
| Ethernet NIC | Connection | Console compatibility |
|---|---|---|
| ENC28J60 | Serial Port 2 | DOL-001 (with SP2) |
ETH2GC Sidecar is premium hardware variant that offers much tidier setup. It's not only compatible with GameBoy Player but also routes cables neatly towards the back of the console. It's secured using springy clip, similar to how original Serial Port 2 cover is mounted.
[!TIP] This variant is only available through me store as a fully assembled unit or DIY kit. If you are interested, please visit my store 🛍️
🌐 ETH2GC Lite
| Ethernet NIC | Connection | Console compatibility |
|---|---|---|
| ENC28J60 | Serial Port 2 | DOL-001 (with SP2) |
This is the simplest adapter available. It uses a single PCB that interfaces ENC28J60 module with GameCube. ETH2GC Lite is compatible with most DOL-001 consoles as long as they have Serial Port 2. Panasonic Q, DOL-101 and possibly some other less common models are not supported. This variant is also incompatible with GameBoy Player but it's possible to trim through hole legs and replace bulky capacitor on ENC28J60 board to make it fit.
To make your own ETH2GC Lite you need to:
- order parts using Parts List below
- do some soldering but don't worry - it's a perfect project for newbies!
- print or get printed 3D case design
- assemble everything
[!TIP] Are you interested in buying fully assembled unit or DIY kit? I'm selling these in my store 🛍️
Parts list
| Part | Quantity | Links |
|---|---|---|
| ENC28J60 MINI | 1 | AliExpress |
| 2x5P Female Headers 8.5mm P=2.54mm Right-Angle | 1 | LCSC Mouser Digikey |
| PCB | 1 | PCBWay |
Ordering PCB
The PCB is really simple and it shouldn't be expensive to order. You can use JLCPCB, PCBWay, AISLER etc. To order the PCB, download *.zip file from Releases page containing PCB gerbers and upload them to manufacturer's website. There are a few requirements you have to pay attention to during order:
- PCB Thickness: 1.2mm
- Finish: ENIG (HASL might work but it is not recommended)
If you haven't done it before, you can order from PCBWay using this link. Remember to set required settings during order process.
By buying from the links above, I get small commision at no additional charge for you. Thanks for supporting the project 🙏
Final words
- ⚠️ Please note this project is under Non Commercial license. Selling ETH2GC modules is strictly prohibited.
- Please check out other awesome projects: Swiss and GBI. Consider supporting @Extrems via his Patreon.
- Greetings to #gc-forever crew :wave:
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Horizontal | J2 |
| 1 | ~ | Nintendo GameCube:GameCube_SerialPort2_Male | U1 |
Questions
How big is the ETH2GC Lite PCB?
It measures 24.1 × 18 mm and has 2 copper layers, 1.2 mm thick.
What parts does the ETH2GC Lite use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ETH2GC Lite KiCad files?
From the webhdx/ETH2GC repository on GitHub, at the commit this page was made from: the board is hardware/ETH2GC_Lite/ETH2GC_Lite.kicad_pcb and its schematic hardware/ETH2GC_Lite/ETH2GC_Lite.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ETH2GC Lite design in my own project?
Its repository states no licence, so its author keeps all rights: ask webhdx before reusing the design.
Similar boards
- 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
