Skip to the content
2 layers58 × 93.3 mmSyringe pump circuit, the printed circuit board in 3D

Syringe pump circuit

wdm230/syringe-pump

This project provides a complete solution for building a cost-effective syringe pump controller. It includes a C# GUI application for controlling the pump, PCB designs, circuit schematics, 3D printed components, and…

Size
58 × 93.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
48
Pads
69
Tracks, vias
47, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Aug 2024
Updated
17 Aug 2024

Overview

Syringe pump circuit is an open-source printed circuit board by wdm230, from the wdm230/syringe-pump repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 58 × 93.3 mm with 11 parts on 48 nets, routed with 47 tracks and 0 vias.

Its parts include 6 connectors and 1 resistor.

README

README.md

Syringe Pump Controller Project

This project provides a complete solution for building a cost-effective syringe pump controller. It includes a C# GUI application for controlling the pump, PCB designs, circuit schematics, 3D printed components, and Arduino code for the ESP32 microcontroller.

Table of Contents

  1. Introduction
  2. Project Structure
  3. C# GUI Application
  4. PCB Design
  5. Circuit and PCB Files
  6. 3D Models
  7. Arduino Code
  8. Documentation
  9. How to Contribute
  10. License

Introduction

This project is focused on developing an affordable syringe pump controller that can be assembled with readily available components. The controller is built around an ESP32 microcontroller, with a C# application providing a user-friendly interface. The hardware includes a custom PCB and 3D-printed components to house the electronics and mechanical parts.

Project Structure

The repository is organized as follows:

  • GUI/: C# codebase for the graphical user interface (GUI) application.
  • PCB/: Gerber files for manufacturing the printed circuit board (PCB).
  • circuit_board/: KiCad project files, including the circuit schematic and PCB layout.
  • models/: 3D models for printing the syringe pump housing and related parts.
  • syringe_pump_controller.ino: Arduino sketch for the ESP32 microcontroller, handling motor control and communication with the GUI.
  • docs.pdf: Comprehensive documentation covering project setup, usage, and technical details.

C# GUI Application

The C# GUI application provides control over the syringe pump's operation. Key features include:

  • Configuring syringe diameter, fluid volume, and flow rate.
  • Real-time motor control, including start, stop, and jog functions.
  • Monitoring of current syringe position, motor RPM, and estimated time to empty.

The application is developed in C# using .NET, and the source code is located in the GUI directory. It can be built using Visual Studio or the .NET CLI.

PCB Design

The custom PCB integrates the ESP32 microcontroller with the motor driver and other essential components. The Gerber files in the PCB directory are ready for submission to any PCB fabrication service.

Circuit and PCB Files

The circuit_board directory contains the KiCad files for the project, including the full circuit schematic and PCB layout. These files are intended for users who need to modify the circuit design or manufacture their own PCBs.

3D Models

The models directory includes STL files for 3D printing the syringe pump housing and other mechanical parts. These models are designed to fit standard syringe sizes and the custom PCB.

Arduino Code

The syringe_pump_controller.ino file is the Arduino code that runs on the ESP32. This code handles:

  • Motor control, including speed, direction, and position tracking.
  • Communication with the C# GUI over serial.
  • Homing and emergency stop functions.

The code is designed to be flexible and can be modified for different hardware configurations.

Documentation

Detailed documentation is available in docs.pdf, covering all aspects of the project, from hardware assembly to software configuration. It also includes troubleshooting tips, among other things.

How to Contribute

Contributions are welcome. If you have improvements or fixes, please fork the repository, make your changes, and submit a pull request. Whether it's code enhancements, bug fixes, or documentation updates, your contributions are appreciated.

License

This project is licensed under the MIT License. See the LICENSE file for more details.

Parts

11
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_2.7mm_M2.5_DIN965_PadH1, H2, H3, H4
2Conn_01x08_SocketConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ3, J4
2Conn_01x19_SocketConnector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_VerticalJ1, J2
11000Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_VerticalR1
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ6
1Screw_Terminal_01x05TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-5-2.54_1x05_P2.54mm_HorizontalJ5

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Syringe pump circuit PCB?

It measures 58 × 93.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Syringe pump circuit use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Syringe pump circuit KiCad files?

From the wdm230/syringe-pump repository on GitHub, at the commit this page was made from: the board is circuit_board/syringe_pump_circuit.kicad_pcb and its schematic circuit_board/syringe_pump_circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Syringe pump circuit design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).