Skip to the content
4 layers40 × 32 mmAd9958-dev, the printed circuit board in 3D
Size
40 × 32 mm
Copper layers
4
Thickness
1.6 mm
Parts
88
Nets
56
Pads
266
Tracks, vias
738, 119
Pours
20
Routed
Yes
KiCad
KiCad 4
Created
25 Oct 2014
Updated
29 Nov 2014

Overview

Ad9958-dev is an open-source printed circuit board by WCP52, from the WCP52/synthesizer repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 40 × 32 mm with 88 parts on 56 nets, routed with 738 tracks and 119 vias.

It is built around the LMH6714MF, AZ1117CH-1.8TRG1 and SS12. Its parts include 36 resistors, 34 capacitors, 4 ICs, 4 connectors and 3 diodes.

Main components

3

README

README.md

AD9958-based synthesizer board

Parts

88
QtyValueFootprintReferences
141nIPC7351-Nominal:CAPC1005X55C5, C7, C9, C11, C13, C15, C17, C19, C21, C23, C26, C27, C31, C32
11100IPC7351-Nominal:RESC1005X40R1, R2, R3, R4, R5, R6, R7, R8, R9, R13, R18
9220nIPC7351-Nominal:CAPC2012X70C6, C8, C10, C12, C16, C18, C20, C22, C24
8360IPC7351-Nominal:RESC1005X40R25, R26, R27, R28, R29, R30, R31, R32
649r9IPC7351-Nominal:RESC1005X40R16, R17, R19, R20, R33, R35
410uIPC7351-Nominal:CAPC2012X70C28, C29, C33, C34
453r6IPC7351-Nominal:RESC1005X40R21, R22, R23, R24
4600IPC7351-Nominal:INDC1005X60E1, E2, E3, E4
3SS12IPC7351-Nominal:DIOM5326X292D1, D2, D3
2100mAIPC7351-Nominal:RESC3216X60R11, R12
2100nIPC7351-Nominal:CAPC1005X55C25, C30
215pIPC7351-Nominal:CAPC1005X55C2, C3
22k2IPC7351-Nominal:RESC1005X40R34, R36
247upassive:C-ALUM-6.3mmC1, C4
2LMH6714MFIPC-semi-nominal:SOT-23-5U3, U4
10RIPC7351-Nominal:RESC1005X40R15
11k91IPC7351-Nominal:RESC1005X40R14
125 MHzIPC7351-Nominal:XTAL1200X480X460X1
1250mAIPC7351-Nominal:RESC3216X60R10
15Vconn:CONN_3-SILJ2
1680pIPC7351-Nominal:CAPC1005X55C14
1AD9958manuf:LFCSP_VQ_56_ADIU2
1AZ1117CH-1.8TRG1IPC-semi-nominal:SOT-223U1
1INTERFACEconn:CONN_20-DILJ1
1OUT0conn:CONN-2_CONSMA001-SMD-GJ4
1OUT1conn:CONN-2_CONSMA001-SMD-GJ3
1SYNC_CLKconn:TEST_SMDTP2
1SYNC_OUTconn:TEST_SMDTP1

Similar boards

  • 4 layers100 × 100 mmWcp52, the printed circuit board in 3D

    Wcp52

    WCP52/gpha

    Final product data for WCP52 Gain/Phase Analyzer

    351 parts1BSD-3-Clause
  • 2 layers76.2 × 70.2 mmCaravel pcb v3 FTDI flexy fixed, the printed circuit board in 3D

    Caravel pcb v3 FTDI flexy fixed

    chipfoundry/caravel_board

    This repository provides firmware examples, flash programming tools, and diagnostic utilities for testing chipIgnite projects using the Caravel SoC.

    60 parts1
  • 4 layers257 × 117.5 mmTeacup carrier, the printed circuit board in 3D

    Teacup carrier

    thingino/teacup-neo

    Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.

    157 parts1GPL-3.0
  • 6 layers76.2 × 76.2 mmLimb module, the printed circuit board in 3D

    Limb module

    MichaelJ-SHSU/thesis-limb_module-rigid

    Rigid control board for the limb module for the undergrad thesis.

    383 parts
  • 4 layers74.8 × 44.5 mmPll ad9544, the printed circuit board in 3D

    Pll ad9544

    OpenSiPM/PLL

    Resonant scanning is essential for high-speed and in vivo laser scanning microscopy. However, resonant scanners are susceptible to jitter due to a mismatch between the mirror's mechanical oscillation and the data…

    77 parts
  • 2 layers54.5 × 52.1 mmCaravel pcb, the printed circuit board in 3D

    Caravel pcb

    efabless/caravel_board

    This repo provides firmware examples, flash programming and diagnostic tools for testing Open MPW and chipIgnite projects using Caravel.

    73 parts40

Questions

How big is the Ad9958-dev PCB?

It measures 40 × 32 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Ad9958-dev use?

88 parts, built around the LMH6714MF, AZ1117CH-1.8TRG1 and SS12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ad9958-dev KiCad files?

From the WCP52/synthesizer repository on GitHub, at the commit this page was made from: the board is pcb/ad9958-dev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ad9958-dev design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).