2 layers290.1 × 130 mm
2 layers52.5 × 30 mm
Phils lab pcb
warhammercasey/phils_lab_pcb- Size
- 52.5 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 50
- Pads
- 132
- Tracks, vias
- 177, 23
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 May 2026
- Updated
- 1 May 2026
Overview
Phils lab pcb is an open-source printed circuit board by warhammercasey, from the warhammercasey/phils_lab_pcb repository on GitHub. It is a 2-layer board of 52.5 × 30 mm with 32 parts on 50 nets, routed with 177 tracks and 23 vias.
It is built around the AMS1117-3.3. Its parts include 13 capacitors, 5 resistors, 2 ICs, 1 diode and 1 connector. It belongs with the STM32 boards of this library.
Main components
1Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9 |
| 4 | 1k5 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R5 |
| 4 | M2 | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C, JTAG, USART |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | BOOT |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J4 |
Questions
How big is the Phils lab pcb PCB?
It measures 52.5 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Phils lab pcb use?
32 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Phils lab pcb KiCad files?
From the warhammercasey/phils_lab_pcb repository on GitHub, at the commit this page was made from: the board is phils_lab_pcb.kicad_pcb and its schematic phils_lab_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Phils lab pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask warhammercasey before reusing the design.
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407