

ESP32-S3-2
- Size
- 30.5 × 69.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 64
- Pads
- 162
- Tracks, vias
- 198, 24
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jul 2025
- Updated
- 12 Jul 2025
Overview
ESP32-S3-2 is an open-source printed circuit board by wangga03, from the wangga03/PCB repository on GitHub. It is a 2-layer board of 30.5 × 69.8 mm with 31 parts on 64 nets, routed with 198 tracks and 24 vias.
It is built around the CH340C, ESP32-S3-WROOM-1-N8 and AMS1117-3.3, with the LESD5D5.0CT1G and SS8050 among its other parts. Its parts include 8 resistors, 6 capacitors, 6 diodes, 4 connectors and 3 ICs. It belongs with the ESP32 boards of this library.
Main components
5CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorisedSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdPCB
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R4, R7, R8 |
| 3 | LESD5D5.0CT1G | LESD5D5.0CT1G:TVS_LESD5D5.0CT1G | D4, D5, D6 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_SPST | Button_Switch_SMD:WGG_PUSH_BUTTON | SW1, SW2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | ~ | TYPE-C-31-M-12:HRO_TYPE-C-31-M-12 | J4 |
More from wangga03/PCB
4- 2 layers77.1 × 113.7 mm

- 4 layers69.6 × 53.8 mm

- 2 layers

- 2 layers142.5 × 79.3 mm

Similar boards
- 4 layers80.5 × 28.2 mm

- 4 layers152.5 × 161.6 mm

MB PCB ControladorESP32
Miguel-Barcelos/Electronics-Projects
Este repositório contém projetos de eletrônica, incluindo circuitos eletrônicos, simulações e design de PCBs.
203 parts - 2 layers95 × 55 mm

Smarthome v0.1
whysixmift/smarthome_v0.1
I wanted to control lights and appliances in my room over Wi-Fi without having loose relay modules, breadboards, and 220V AC wires floating around my desk.
63 parts - 2 layers68 × 47.4 mm

Air quality monitor
ajkumar-1907/POWER-ELECTRONICS-LIB
Open-source library of power electronics converter topologies — KiCad schematics, working principles, use cases, and design notes for DC-DC, AC-DC, DC-AC, and AC-AC converters. Free to use, modify, and build on.
59 parts1MIT - 4 layers68.1 × 75 mm

- 2 layers60.8 × 31.3 mm

- 2 layers78 × 92 mm

ESPCARproject
Sumya99/RobotCarPCB
NAND сургалтын төвийн сурагчдад зориулсан робот машины PCB төсөл
92 parts - 2 layers68 × 54 mm

Controller
byrantech/stepcraft-3-d600-controller
Open-source FluidNC Controller for the Stepcraft-3/D.600 system.
97 parts2MIT
Questions
How big is the ESP32-S3-2 PCB?
It measures 30.5 × 69.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-S3-2 use?
31 parts, built around the CH340C, ESP32-S3-WROOM-1-N8, AMS1117-3.3 and LESD5D5.0CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-S3-2 KiCad files?
From the wangga03/PCB repository on GitHub, at the commit this page was made from: the board is ESP32-S3-2/ESP32-S3-2.kicad_pcb and its schematic CapstoneDesign/CapstoneDesign.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-S3-2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask wangga03 before reusing the design.