Skip to the content
2 layers139.7 × 42.5 mmSI5351 Breakout, the printed circuit board in 3D

I just wanted to make a PCB for ham radio purpose and here is the PCB part.

Size
139.7 × 42.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
37
Pads
140
Tracks, vias
151, 8
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Jul 2021
Updated
8 Jul 2021

Overview

SI5351 Breakout is an open-source printed circuit board by walzert, from the walzert/WSRP_beacon_PCB repository on GitHub. It is a 2-layer board of 139.7 × 42.5 mm with 33 parts on 37 nets, routed with 151 tracks and 8 vias.

Its parts include 13 connectors, 3 ICs, 3 diodes, 3 switches and 3 fuses. It belongs with the interfaces and adapters boards of this library.

README

README.md

Yet another WSPR beacon based on SI5351

I just wanted to make a PCB for ham radio purpose and here is the PCB part.

Render

Parts

33
QtyValueFootprintReferences
9Conn_01x02_FemaleConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ2, J3, J4, J5, J6, J7, J8, J9, J10
3AMPHamRadio:AMPU1, U2, U3
3CON-SMA-EDGE-SSMA_Edge:RFSOLUTIONS_CON-SMA-EDGE-SJ17, J18, J19
3DDiode_THT:D_A-405_P7.62mm_HorizontalD1, D2, D3
3G5V-2Relay_THT:Relay_DPDT_Omron_G5V-2K1, K2, K3
1ArduinoConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalArduino1
1ArduinoRXTXConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalRX|TX
1Conn_01x03_FemaleConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1
1DisplayConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalDisplay1
1GPSConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalGPS1
1RTCConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalRTC1
1SI5351Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalSI5351
1TPF_0HamRadio:TPFF1
1TPF_1HamRadio:TPFF2
1TPF_2HamRadio:TPFF3

The 31 most common of 33 parts.

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the SI5351 Breakout PCB?

It measures 139.7 × 42.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SI5351 Breakout use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SI5351 Breakout KiCad files?

From the walzert/WSRP_beacon_PCB repository on GitHub, at the commit this page was made from: the board is SI5351_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SI5351 Breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask walzert before reusing the design.