2 layers109 × 30.6 mm
4 layers
IC1 TEST
walkerhensley/VCU-PCB- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 26
- Nets
- 61
- Pads
- 134
- Tracks, vias
- 145, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Feb 2022
- Updated
- 28 Feb 2022
Overview
IC1 TEST is an open-source printed circuit board by walkerhensley, from the walkerhensley/VCU-PCB repository on GitHub. It is a 4-layer board with 26 parts on 61 nets, routed with 145 tracks and 7 vias.
It is built around the DEV-16771, MAX6369KA+T and 100SP1T1B1M2QEH. Its parts include 8 resistors, 3 ICs, 3 diodes, 2 capacitors and 2 switches.
Main components
3DEV-16771
-- New Arrivals ROHSSparkFun ElectronicsUncategorised
MAX6369KA+T
SOT-23-8-40℃~+125℃@(Ta) 1 100ms 2.5V~5.5V 8uA Active Low No Open Drain Watchdog Timer Yes SOT-23-8 Supervisor and Reset ICs ROHSMaxim Integrated (Analog Devices)Supervisor And Reset ICs
100SP1T1B1M2QEH
插件,12.7x6.9mm-30℃~+85℃ 12.7mm 120V 28.19mm 28V 40,000 Cycles 5A 6.86mm Cylinder Lever PC Pin SPDT Through Hole 插件,12.7x6.9mm Toggle Switches ROHSE-SwitchToggle Switches
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R7 |
| 3 | Conn_01x03_Female | Connector_Molex:Molex_SL_171971-0003_1x03_P2.54mm_Vertical | SBUS_CONN1, wheel_speed_sensor1, wheel_speed_sensor2 |
| 3 | LED | LED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O6.35mm_Z4.9mm | LED1, LED2, LED3 |
| 3 | R_US | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R8 |
| 2 | 10000 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 10k1, R10 |
| 1 | 0.1e-6 | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 100SP1T1B1M2QEH | switch:100SP1T1B1M2QEH | reset_switch1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | ADM3054WBRWZ-RL7-!my_lib | amd:ADM3053BRWZ | IC1 |
| 1 | B4B-XH-A_LF__SN_-!my_lib | Connector_Molex:Molex_SL_171971-0004_1x04_P2.54mm_Vertical | J1 |
| 1 | C_Small | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C1 |
| 1 | Conn_01x02_Female | Connector_Molex:Molex_SL_171971-0002_1x02_P2.54mm_Vertical | WATCHDOG_RELAY_COILS1 |
| 1 | DEV-16771 | teensy4.1:Teensy41 | U1 |
| 1 | MAX6369KA+T | watchdog:MAX6369KA&plus_T | U2 |
| 1 | SW_DIP_x03 | Button_Switch_THT:SW_DIP_SPSTx03_Piano_10.8x9.18mm_W7.62mm_P2.54mm | SW1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW2 |
Questions
What parts does the IC1 TEST use?
26 parts, built around the DEV-16771, MAX6369KA+T and 100SP1T1B1M2QEH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IC1 TEST KiCad files?
From the walkerhensley/VCU-PCB repository on GitHub, at the commit this page was made from: the board is IC1_TEST.kicad_pcb and its schematic IC1_TEST.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IC1 TEST design in my own project?
Its repository states no licence, so its author keeps all rights: ask walkerhensley before reusing the design.
Similar boards
- 2 layers94.8 × 73.1 mm
- 2 layers144 × 165.7 mm
ReedRelay Drive
ssyhy9-Hongyu/MS_Thesis_PCB
PCB version control for current source inverter project
30 parts - 2 layers40 × 60 mm
Joint controller board rev d logic
aliahumanoid/alia-humanoid-core
Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.
43 parts12GPL-3.0 - 4 layers90.2 × 95.9 mm
- 4 layers81 × 81 mm
OBC
HernanIbarra60/OBC-
This project is an On-Board Computer (OBC) for a CubeSat. Its main core is a STM32F4 microcontroller.
131 parts - 2 layers
- 2 layers40 × 40 mm
