
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

The PCB and 3D files for an accurately scaled 1:160 traffic light
N Scale Traffic Light is an open-source printed circuit board by vsi5004, from the vsi5004/N-Scale-Traffic-Light repository on GitHub, published under the MIT licence. It is a 2-layer board of 4 × 14.5 mm with 10 parts on 9 nets, routed with 31 tracks and 7 vias.
It is built around the EXB-28V221JX. Its parts include 5 connectors, 4 diodes and 1 resistor.
The PCB and 3D files for an accurately scaled 1:160 traffic light
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x01_Pin | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J1, J2, J3, J4, J5 |
| 2 | Green | LED_SMD:LED_0402_1005Metric | D3, D4 |
| 1 | EXB-28V221JX | footprints:EXB28V_PAN | R4 |
| 1 | Red | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | Yellow | LED_SMD:LED_0402_1005Metric | D2 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 4 × 14.5 mm and has 2 copper layers, 0.69 mm thick.
10 parts, built around the EXB-28V221JX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vsi5004/N-Scale-Traffic-Light repository on GitHub, at the commit this page was made from: the board is NScaleTrafficLight.kicad_pcb and its schematic NScaleTrafficLight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).