
SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

Converts from 1 midi input to 4 CV outputs with configurable clock divider
Midi2cv is an open-source printed circuit board by VoloshynArtem, from the VoloshynArtem/midi2cv repository on GitHub. It is a 2-layer board of 62.5 × 51 mm with 24 parts on 41 nets, routed with 122 tracks and 0 vias.
Its parts include 7 resistors, 7 connectors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 6N138 | 6N1318:DIP-8_AVA | U1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J8 |
| 1 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | GND |
| 1 | MIDI IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | O1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | O2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | O2 |
| 1 | O3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | O4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | Oled |
| 1 | PWR IN | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J6 |
| 1 | RotaryEncoder_Switch | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | ENC |
| 1 | programming bypass | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
The 21 most common of 24 parts.

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.


rusefi/rusefi
rusefi - GPL internal combustion engine control unit

DraftShift/StealthChanger
Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

It measures 62.5 × 51 mm and has 2 copper layers, 1.6 mm thick.
24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the VoloshynArtem/midi2cv repository on GitHub, at the commit this page was made from: the board is midi2cv.kicad_pcb and its schematic midi2cv.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask VoloshynArtem before reusing the design.