Skip to the content
2 layers39.6 × 19.7 mmTrackpad, the printed circuit board in 3D

Trackpad solution for the Corne keyboard

Size
39.6 × 19.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
39
Pads
103
Tracks, vias
253, 19
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Jan 2019
Updated
12 Jun 2019

Overview

Trackpad is an open-source printed circuit board by vlukash, from the vlukash/corne-trackpad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 39.6 × 19.7 mm with 15 parts on 39 nets, routed with 253 tracks and 19 vias.

Its parts include 6 capacitors, 4 resistors, 4 ICs and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Trackpad in a Keycap for Corne/CrKbd Keyboard

This is a Trackpad add-on for the Corne keyboard.

This add-on consists of two main parts:

  • an adapter PCB that goes between Elite-C and the main keyboard
  • a connector PCB that links trackpad with the adapter

There are two different options available for the Trackpad sensor mount (connector PCB)

  • on the 'H' button keycap via flex cable (Connector V1)
  • no-flex mount directly on the connector PCB (Connector V2)

Both options compatible with the main adapter PCB, see photos below.

Schematics and PCB design included in this repository. Trackpad.c reads the trackpad data and sends it to QMK.

Please find more information in my blogpost.

Video

Turn on the subtitles option :)

https://www.youtube.com/watch?v=eY_9cieYMEQ

Build Guide

https://github.com/vlukash/corne-trackpad/blob/master/build-guide.md

Firmware

Corne keyboard uses QMK - an open-source keyboard firmware project.
Please use QMK guide to setup your local environment.

The Trackpad add-on uses right-master configuration, and USB cable connects to the right keyboard with the trackpad.

Because of the adapter PCB, left and right keyboards have to be flashed with different firmware.

To build and flash the right keyboard (with the trackpad):

text
make crkbd:vlukash_trackpad_right:dfu

And the left part

text
make crkbd:vlukash_trackpad_left:dfu

Here is a PR that could be used as an example for creating your own Corne keymaps with the Trackpad add-on support.

Photos

Trackpad sensor mounted directly on the connector PCB (Connector V2): Corne with no-flex trackpad Trackpad sensor mounted on 'H' button keycap via flex cable (Connector V1): Corne with trackpad

All parts

Adapter

Adapter

Adapter

Connector

Connector

Connector

Button

Parts

15
QtyValueFootprintReferences
2100nFCapacitor_SMD:C_0805_2012MetricC4, C6
2100pFCapacitor_SMD:C_0805_2012MetricC3, C5
210uFCapacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-UC1, C2
22.5KResistor_SMD:R_0805_2012MetricR2, R4
23.3KResistor_SMD:R_0805_2012MetricR1, R3
1Elite-C-nftrackpad:Elite-C-nfU1
1J1trackpad:67997-410HLFJ1
1NCP1117-2.85_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1ProMicrotrackpad:ArduinoProMicro-nfU2
1U3trackpad:TXB0106PWRU3

More from vlukash/corne-trackpad

1
  • 2 layers48.2 × 19.9 mmTrackpad conn no flex, the printed circuit board in 3D

    Trackpad conn no flex

    vlukash/corne-trackpad

    Trackpad solution for the Corne keyboard

    6 parts166GPL-3.0

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Trackpad PCB?

It measures 39.6 × 19.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Trackpad use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Trackpad KiCad files?

From the vlukash/corne-trackpad repository on GitHub, at the commit this page was made from: the board is adapter/trackpad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Trackpad design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).