Skip to the content
2 layers45.3 × 58.7 mmMogumote, the printed circuit board in 3D

Simple WiFi remote based of my TLT framework

Size
45.3 × 58.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
26
Pads
96
Tracks, vias
120, 10
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
16 Dec 2023
Updated
19 Jan 2025

Overview

Mogumote is an open-source printed circuit board by vlhtg, from the vlhtg/mogumote repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.3 × 58.7 mm with 26 parts on 26 nets, routed with 120 tracks and 10 vias.

It is built around the ESP-12F and AMS1117-3.3. Its parts include 8 resistors, 8 switches, 3 capacitors, 2 ICs and 2 connectors. It belongs with the radio and wireless boards and the ESP8266 boards of this library.

Main components

2

README

README.md

mogumote

Simple WiFi remote based of my TLT framework

Hardware - v0.1 done

Software - WIP

Obviously, the general shape of the PCB is NOT my creation, but it is actually taken from the well-known game Among Us. This project acts as a tribute to that.

Read more about this project on my portfolio page: https://vlhtg.com/mogumote/

Parts

26
QtyValueFootprintReferences
6SW_AButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW3, SW4, SW5, SW6, SW7, SW8
510kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4, R5
210uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
25.1KCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderR6, R7
2LOGOLOGOG***, G***
1100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1BootButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW1
1ESP-12FRF_Module:ESP-12EU1
1LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1
1RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
1ResetButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW2
1UARTConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ1
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_HorizontalJ2

Similar boards

  • 2 layers49.4 × 35.8 mmWS2812Controller, the printed circuit board in 3D

    WS2812Controller

    klein0r/pcb-ws2812-wifi-controller

    WiFi Controller for WS2812 LED Stripes

    22 parts82MIT
  • 2 layers69.9 × 69.9 mmVelux controller, the printed circuit board in 3D

    Velux controller

    thorio/esphome-projects

    collection of open home automation projects

    35 parts29GPL-3.0
  • 2 layers73.1 × 18.3 mmRJ10Adapter, the printed circuit board in 3D

    RJ10Adapter

    klein0r/pcb-ttl-ftdi-esp-adapter

    PCB to connect a TTL reader either to an FTDI or ESP12-E/F (WiFi)

    16 parts25MIT
  • 4 layers44.5 × 22.5 mmIkea fyrtur, the printed circuit board in 3D

    Ikea fyrtur

    mjuhanne/ikea-fyrtur

    ESP8266 WiFi module PCB for Ikea Fyrtur blinds

    46 parts23MIT
  • 2 layers84.3 × 56.9 mmEbus, the printed circuit board in 3D

    Ebus

    piwko28/smart-home-ebus-adapter

    eBUS adapter PCB for use with ebusd-esp firmware as well as with other UART devices.

    51 parts18GPL-3.0
  • 2 layers67.1 × 62.2 mmFeinstaub, the printed circuit board in 3D

    Feinstaub

    str-dst/feinstaub

    piggyback PCB for the SDS011 sensor

    14 parts8CC-BY-SA-4.0
  • 2 layers63.9 × 81.7 mmWifi modem, the printed circuit board in 3D

    Wifi modem

    hanshuebner/wifi-modem

    PCB to be used with Zimodem

    56 parts6
  • 2 layers80 × 48.8 mmESP8266-Sentinel Kinetic Wired Remote, the printed circuit board in 3D

    ESP8266-Sentinel Kinetic Wired Remote

    alextrical/ESP8266-Sentinel-Kinetic-Wired-Remote

    ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller

    48 parts4CERN-OHL-S-2.0

Questions

How big is the Mogumote PCB?

It measures 45.3 × 58.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mogumote use?

26 parts, built around the ESP-12F and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mogumote KiCad files?

From the vlhtg/mogumote repository on GitHub, at the commit this page was made from: the board is PCB/mogumote.kicad_pcb and its schematic PCB/mogumote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mogumote design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).