

Smart cutlery pcb
ELEC3117 project, 2017S2. Jamon & Seb.
- Size
- 95.4 × 19.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 96
- Pads
- 221
- Tracks, vias
- 1,197, 107
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Aug 2017
- Updated
- 6 Oct 2017
Overview
Smart cutlery pcb is an open-source printed circuit board by vk2seb, from the vk2seb/smart_cutlery_pcb repository on GitHub. It is a 2-layer board of 95.4 × 19.9 mm with 53 parts on 96 nets, routed with 1,197 tracks and 107 vias.
It is built around the ASMT-YTC2-0AA02, MPU-9250 and MBR0520, with the BSS138 and BSS84 among its other parts. Its parts include 21 resistors, 13 capacitors, 5 ICs, 3 diodes and 2 transistors. It belongs with the STM32 boards of this library.
Main components
5ASMT-YTC2-0AA02
PLCC-6PLCC-6 LED Indication - Discrete ROHSBroadcom LimitedLED Indication - DiscreteMPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersMBR0520
SOD-123-55℃~+150℃ 20V 450mV@500mA 5.5A 500mA Independent SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdSmart Cutlery (PCB)
ELEC3117 project, 2017S2. Jamon & Seb.
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10K | Resistors_SMD:R_0603 | R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 4 | 100n | Capacitors_SMD:C_0603 | C1, C2, C3, C5 |
| 3 | 100nF | Capacitors_SMD:C_0603 | C7, C12, C13 |
| 3 | 180 | Resistors_SMD:R_0603 | R19, R20, R21 |
| 3 | 47nF | Capacitors_SMD:C_0603 | C14, C15, C16 |
| 3 | MBR0520 | Diodes_SMD:D_SOD-123 | D3, D4, D5 |
| 2 | 100 | Resistors_SMD:R_0603 | R2, R3 |
| 2 | 100K | Resistors_SMD:R_0603 | R4, R5 |
| 1 | 100uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Reflow | C8 |
| 1 | 10uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Reflow | C10 |
| 1 | 3V CR1225 | BC_2011_CR1225_HOLDER:BC-2011-CR1225 | BT1 |
| 1 | 4.7k | Resistors_SMD:R_0603 | R1 |
| 1 | 47K | Resistors_SMD:R_0603 | R7 |
| 1 | 47uH | Inductors_SMD:L_0603 | L2 |
| 1 | 4K7 | Resistors_SMD:R_0603 | R6 |
| 1 | 68uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Reflow | C11 |
| 1 | ASMT-YTC2-0AA02 | LEDs:LED_RGB_PLCC-6 | U5 |
| 1 | BSS138 | TO_SOT_Packages_SMD:SOT-23 | Q2 |
| 1 | BSS84 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J2 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J1 |
| 1 | Ferrite | Inductors_SMD:L_0603 | L1 |
| 1 | LOGO | smart_cutlery_pcb:touch_pattern_1 | G*** |
| 1 | MODULE-BLUETOOTH-HC-05(34P-27X13MM) | bluetooth_hc-05:BT34P-SMD-1.5-26.9X13.0X2.2MM | U2 |
| 1 | MPU-9250 | Housings_DFN_QFN:QFN-24-1EP_3x3mm_Pitch0.4mm | U4 |
| 1 | NCP1402SN33T1G | NCP1402SN33T1G:SOT95P275X110-5N | U3 |
| 1 | STM32L053C6Tx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | TL3342 | Buttons_Switches_SMD:SW_SPST_TL3342 | SW1 |
The 51 most common of 53 parts.
Similar boards
- 2 layers99.6 × 50.4 mm

- 6 layers31.5 × 44.5 mm

- 2 layers146.1 × 141 mm

- 2 layers65 × 56 mm

Dingo hat
CCHS-Melbourne/dingo-cap
Donkey-Hat is a Raspberry Pi Hat to drive a Donkey Car (http://www.donkeycar.com/)
98 parts - 4 layers129 × 104.6 mm

- 4 layers90 × 80 mm

- 2 layers90 × 50 mm

- 4 layers70 × 50 mm

Isc motorbeep
ISC-HEI/isc-motorbeep
ESP32 board driving two bipolar stepper motors and a speaker from 3x AA cells — a complete KiCad 9 schematic authored headlessly via MCP. ERC-clean, netlist-asserted, priced BOM.
69 parts
Questions
How big is the Smart cutlery pcb PCB?
It measures 95.4 × 19.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Smart cutlery pcb use?
53 parts, built around the ASMT-YTC2-0AA02, MPU-9250, MBR0520 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smart cutlery pcb KiCad files?
From the vk2seb/smart_cutlery_pcb repository on GitHub, at the commit this page was made from: the board is smart_cutlery_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smart cutlery pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask vk2seb before reusing the design.