Skip to the content
2 layers56.8 × 24.3 mmPassive rpi hub75-adapter, the printed circuit board in 3D

Passive rpi hub75-adapter

vitorleal/matrix-led-python30

🤖 Python module to control a 32x32 Matrix Led in the Raspberry Pi

Size
56.8 × 24.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
34
Pads
76
Tracks, vias
271, 14
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
11 Jun 2015
Updated
11 Jun 2015

Overview

Passive rpi hub75-adapter is an open-source printed circuit board by vitorleal, from the vitorleal/matrix-led-python repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 56.8 × 24.3 mm with 5 parts on 34 nets, routed with 271 tracks and 14 vias.

It belongs with the interfaces and adapters boards of this library.

README

adapter/active/README.md

Adapter PCB to support up to 2 panels

  • Supports one panel for Raspberry PIs with 26 GPIO pins and two panels for newer plus models and Raspberry Pi 2 that have 40 GPIO pins.
  • Uses HCT245 to level shift signals from 3.3V to 5V and shield the Raspberry Pi GPIOs from overloading.
  • This supports two panels and provides convenient breakouts for I²C and the serial interface.
  • Open source KiCAD PCB EDA format.
  • If you are interested in connecting three RGB panels, check out the Active-3 board (it won't support the serial intefaces though).

For multiple parallel boards to work and using the I2C and serial interface you have to uncomment

text
 #DEFINES+=-DSUPPORT_MULTI_PARALLEL   # remove the '#' in the begging

in lib/Makefile.

Preview

Parts

5
QtyValueFootprintReferences
2CONN_01X02Pin_Headers:Pin_Header_Straight_1x02P2, P3
2CONN_02X08Pin_Headers:Pin_Header_Straight_2x08Panel-1, Panel-2
1CONN_02X20Pin_Headers:Pin_Header_Straight_2x20P1

More from vitorleal/matrix-led-python

2
  • 2 layers83.8 × 33.7 mmActive3-rpi hub75-adapter, the printed circuit board in 3D

    Active3-rpi hub75-adapter

    vitorleal/matrix-led-python

    🤖 Python module to control a 32x32 Matrix Led in the Raspberry Pi

    14 parts30GPL-2.0
  • 2 layers56.8 × 30 mmActive rpi hub75-adapter, the printed circuit board in 3D

    Active rpi hub75-adapter

    vitorleal/matrix-led-python

    🤖 Python module to control a 32x32 Matrix Led in the Raspberry Pi

    11 parts30GPL-2.0

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Passive rpi hub75-adapter PCB?

It measures 56.8 × 24.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Passive rpi hub75-adapter use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Passive rpi hub75-adapter KiCad files?

From the vitorleal/matrix-led-python repository on GitHub, at the commit this page was made from: the board is adapter/passive/passive-rpi-hub75-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Passive rpi hub75-adapter design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).