

Octoclick
- Size
- 138 × 79.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 43
- Pads
- 405
- Tracks, vias
- 266, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Oct 2024
- Updated
- 10 Oct 2024
Overview
Octoclick is an open-source printed circuit board by Virginia2244, from the Virginia2244/octoclick repository on GitHub, published under the MIT licence. It is a 2-layer board of 138 × 79.3 mm with 45 parts on 43 nets, routed with 266 tracks and 0 vias.
Its parts include 21 diodes and 21 switches.
README
README.mdoctoclick
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | PG1350 | S1, S2, S3, S4, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21 +5 | |
| 21 | ComboDiode | D1, D2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +5 | |
| 2 | JST_PH_S2B-PH-K_02x2.00mm_Angled | JST1, JST2 | |
| 1 | xiao-ble-tht |
Similar boards
- 2 layers30 × 61.3 mm

- 2 layers97 × 78.5 mm

Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm

- 2 layers26.5 × 34.4 mm

PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm

- 2 layers63.5 × 63.5 mm

Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers99.1 × 81.9 mm

RC6502 Terminal
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
45 parts193GPL-3.0 - 2 layers116.1 × 94.7 mm

Questions
How big is the Octoclick PCB?
It measures 138 × 79.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Octoclick use?
45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Octoclick KiCad files?
From the Virginia2244/octoclick repository on GitHub, at the commit this page was made from: the board is kicad/rev_1/board/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Octoclick design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).