Skip to the content
2 layers100 × 100 mmMusicNote, the printed circuit board in 3D

MusicNote is an ESP32-S3-powered synthesizer like HiChord!

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
35
Pads
79
Tracks, vias
168, 27
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 Oct 2026
Updated
25 Oct 2026

Overview

MusicNote is an open-source printed circuit board by ViratS-best, from the ViratS-best/MusicNote repository on GitHub. It is a 2-layer board of 100 × 100 mm with 11 parts on 35 nets, routed with 168 tracks and 27 vias.

Its parts include 7 connectors, 3 switches and 1 IC. It belongs with the ESP32 boards of this library.

README

README.md

MUSICNOTE

MusicNote is an ESP32-S3-powered synthesizer like HiChord!

The design uses a Waveshare ESP32-S3-Zero, one MPR121 capacitive touch controller, an I2C OLED display, an analog joystick, three push buttons, and a MAX98357A I2S amplifier.

View PCB on KiCanvas

Screenshot 2026-10-23 160232 Screenshot 2026-10-21 174227

Hardware design:

Capacitance keys!

image

Push buttons:

image

OLED screen:

image

I ran out of pins so I had to use this:

image

Joystick:

image

Finished Schematic:

Screenshot 2026-10-21 142035

Fully routed and copper-poured PCB:

Screenshot 2026-10-21 174227

CAD

Make the enclosure first:

Screenshot 2026-10-23 154808

Then place .step file of PCB:

Screenshot 2026-10-23 155817

Disclaimer

The firmware for this project was taken from Alxdree's GitHub repository: TYPE-2

I had to change some stuff in the firmware to make it work for my project.

Lastly, I did consult AI when I was stuck with some of the firmware. (The TYPE-2 project firmware is really advanced, and I needed some help on where to change things, but I did most of it by myself, with the consultation of AI)

Project files

  • Hardware/ KiCad schematic, PCB, project, and custom footprint library.
  • CAD/ STEP model.
  • production/ BOM, placement data, netlist, and gerber.
  • Firmware/ Firmware.

BoM

ComponentQtyPrice
MusicNote PCB1$4.00
Waveshare ESP32-S3-Zero1$7.41
MPR121 Capacitive Touch Sensor Module1$1.09
0.96-inch IIC OLED Display Module1$2.79
MAX98357A I2S Class D Audio Amplifier1$2.52
4 Ohm / 8 Ohm Speaker1$2.55
Analog Joystick1$3.50
Push Buttons3$0.00

Parts

11
QtyValueFootprintReferences
3SW_PushHackclub Footprints:Kailh Choc Low-Profile SwitchesSW1, SW2, SW3
1Capacitive Touch ButtonsVirats Library:Capictance KeysJ7
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ4
1Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1
1Conn_01x12Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ5
1Waveshare ESP32-S3-ZEROHackclub Footprints:Waveshare ESP32-S3-ZeroU1

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the MusicNote PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MusicNote use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MusicNote KiCad files?

From the ViratS-best/MusicNote repository on GitHub, at the commit this page was made from: the board is Hardware/MusicNote.kicad_pcb and its schematic Hardware/MusicNote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MusicNote design in my own project?

Its repository states no licence, so its author keeps all rights: ask ViratS-best before reusing the design.