

RC Control Schematic
A 4WD beetleweight battle robot built to fight opponents of a similar weight class.
- Size
- 60 × 97 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 39
- Pads
- 88
- Tracks, vias
- 173, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Dec 2025
- Updated
- 30 Dec 2025
Overview
RC Control Schematic is an open-source printed circuit board by virajkhanna, from the virajkhanna/BattleAxe repository on GitHub. It is a 2-layer board of 60 × 97 mm with 17 parts on 39 nets, routed with 173 tracks and 8 vias.
Its parts include 4 switches, 3 capacitors, 3 resistors, 2 ICs and 2 connectors. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdBattleAxe
A 4WD beetleweight battle robot built to fight opponents of a similar weight class.
DISCLAIMER
This repository contains experimental and untested code and hardware schematics. Use them AT YOUR OWN RISK. The author assumes NO RESPONSIBILITY for ANY damage, data loss, or other issues that may arise from using this repository. By proceeding to do anything, you understand any action you perform is AT YOUR OWN RISK.
IMAGES
The schematic for the main battle robot

The schematic for the remote controller

The PCB of the remote controller

Bill of Materials
| Name | Use | Price (Indian Rupees) | Quantity | Total | Total (US Dollars) | Link to Product |
|---|---|---|---|---|---|---|
| Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A | Motor Driver | 809 | 2 | 1618 | 18.01 | https://robu.in/product/drv8833-2-channel-dc-motor-driver-module/ |
| Raspberry Pi Pico H | Microcontroller to use on the Battle Robot | 466 | 1 | 466 | 5.19 | https://robu.in/product/raspberry-pi-pico-with-headers/ |
| NRF24L01+ 2.4GHz RF Transceiver Module | Transceiver for RC Control | 73 | 2 | 146 | 1.63 | https://robu.in/product/micro-nrf24l01-power-enhanced-2-4ghz-rf-transceiver-module/ |
| DC-DC 5V 3A BEC Power Supply Buck Step Down Module | Converts 7.4V Battery Voltage to a usable 5V for the Raspberry Pi Pico and the servo motor used in the flipping mechanism | 90 | 1 | 90 | 1 | https://robu.in/product/ultra-small-size-dc-dc-5v-3a-bec-power-supply-buck-step-down-module/ |
| MCP1703-3302E/DB-MICROCHIP-Fixed LDO Voltage Regulator | Converts 7.4V Battery Voltage to a usable 3.3V for the NRF24L01+ transceiver module | 158 | 2 | 316 | 3.52 | https://robu.in/product/mcp1703-3302e-db-microchip-fixed-ldo-voltage-regulator-2-7v-to-16v-525mv-dropout-3-3vout-250maout-sot-223-3/ |
| 10 uF Through-Hole Electrolytic Capacitor | 0.84 | 2 | 1.68 | 0.0188 | https://robu.in/product/10-uf-25v-through-hole-electrolytic-capacitor-pack-of-40/ | |
| 1000 uF Through-Hole Electrolytic Capacitor | 11 | 1 | 11 | 0.12 | https://robu.in/product/1000uf-25v-electrolytic-capacitor-dip-pack-of-5/ | |
| 1 uF Through-Hole Electrolytic Capacitor | 1.69 | 4 | 6.76 | 0.038 | https://robu.in/product/1-uf-50v-through-hole-electrolytic-capacitor-pack-of-40/ | |
| Pro-Range NMC 18650 7.4V 6000mAh 3C 2S2P Li-Ion Battery Pack | Portable Power for the main Battle Robot | 1126 | 1 | 1126 | 12.53 | https://robu.in/product/pro-range-18650-li-ion-6000mah-7-4v-2s1p-protected-battery-pack-3c/ |
| 32V 1kA Blade Fuse 10A Automotive Fuses | Power Safety for the main Battle Robot | 16 | 2 | 32 | 0.36 | https://robu.in/product/0287010-pxcn-littlefuse-32v-1ka-blade-fuse-10a-automotive-fuses-rohs/ |
| Rocker Switch | Power Switch for the main Battle Robot and the remote controller | 6 | 2 | 12 | 0.134 | https://robu.in/product/1-month-warranty-585/ |
| 37GB-3530 DC12V 320RPM/MIN Reduction Motor | Motors for the main battle robot | 715 | 4 | 2860 | 31.84 | https://robu.in/product/37gb-3530-dc12v-320rpm-min-reduction-motor/ |
| UL1007 18AWG PVC Electronic Wire | Power wires for the motors | 23 | 10 metres | 230 | 2.56 | https://robu.in/product/ul1007-18awg-pvc-electronic-wire-green/ |
| 8 x 12 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch | Board to hold soldered components | 55 | 2 | 110 | 1.22 | https://robu.in/product/8-x-12-cm-universal-pcb-prototype-board-single-sided-2-54mm-hole-pitch/ |
| 100nf 50v Disc Capacitor | 1 | 10 | 10 | 0.11 | https://robu.in/product/100nf-50v-through-hole-multilayer-ceramic-capacitor/ | |
| 868-062-000-LITTELFUSE-868-062-000-Fuseholder | Fuse holder for battery fuse | 66 | 2 | 132 | 1.46 | https://robu.in/product/868-062-000-littelfuse-868-062-000-fuseholder-automotive-blade-1-fuse-30-a-32-vac-32-vdc-ato/ |
| 0.91 inch 128 32 Blue OLED Display Module | Informational Display for remote controller | 169 | 1 | 169 | 1.88 | https://robu.in/product/0-91-inch-128x32-i2c-iic-serial-blue-oled-lcd-display-module |
| Push Button | Controls input for remote controller | 23 | 3 | 69 | 0.77 | https://robu.in/product/ds-451-push-button-momentary-switch-10mm-2pinoff-on/ |
| PS2 Joystick Module Breakout Sensor | Controls input for remote controller | 32 | 1 | 32 | 0.36 | https://robu.in/product/joystick-module-ps2-breakout-sensor/ |
| Nano V3.0 Compatible Development Board ATmega328P | Microcontroller to use on the remote controller | 185 | 1 | 185 | 2.06 | https://robu.in/product/atmega328p-5v-nano-v3-0-development-board-16mhz-ch340-type-c/ |
| Pro-Range INR 18650 7.4V 2200mAh 2C 2S1P Li-Ion Battery Pack | Portable Power for the remote controller | 576 | 1 | 576 | 6.41 | https://robu.in/product/18650-li-ion-2200mah-7-4v-2s1p-protected-battery-pack-2c/ |
| 10K Resistor | 0.35 | 3 | 1.05 | 0.012 | https://robu.in/product/10k-ohm-0-25w-metal-film-resistor-pack-of-100/ | |
| PCB (Only board - NO ASSEMBLY) | PCB for the Remote Controller, will hand solder components | 900 | 1 | 900 | 10.01 | https://robu.in/product/online-pcb-manufacturing-service/ |
| INR 9099.49 | $101.3328 |
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1, SW2, SW3 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 1 | 10A | Fuse:FuseHolder_Blade_ATO_Littelfuse_FLR_178.6165 | F1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 7.4V 18650 Battery 2200 mAh 2C | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | BT1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | MCP1703Ax-330xxDB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U2 |
| 1 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW4 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the RC Control Schematic PCB?
It measures 60 × 97 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RC Control Schematic use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RC Control Schematic KiCad files?
From the virajkhanna/BattleAxe repository on GitHub, at the commit this page was made from: the board is Schematics and PCBs/RC_Control_Files/RC_Control_Schematic.kicad_pcb and its schematic Schematics and PCBs/BattleAxe_Files/BattleAxe_Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RC Control Schematic design in my own project?
Its repository states no licence, so its author keeps all rights: ask virajkhanna before reusing the design.