Skip to the content
2 layers60 × 97 mmRC Control Schematic, the printed circuit board in 3D

RC Control Schematic

virajkhanna/BattleAxe

A 4WD beetleweight battle robot built to fight opponents of a similar weight class.

Size
60 × 97 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
39
Pads
88
Tracks, vias
173, 8
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Dec 2025
Updated
30 Dec 2025

Overview

RC Control Schematic is an open-source printed circuit board by virajkhanna, from the virajkhanna/BattleAxe repository on GitHub. It is a 2-layer board of 60 × 97 mm with 17 parts on 39 nets, routed with 173 tracks and 8 vias.

Its parts include 4 switches, 3 capacitors, 3 resistors, 2 ICs and 2 connectors. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

BattleAxe

A 4WD beetleweight battle robot built to fight opponents of a similar weight class.

DISCLAIMER

This repository contains experimental and untested code and hardware schematics. Use them AT YOUR OWN RISK. The author assumes NO RESPONSIBILITY for ANY damage, data loss, or other issues that may arise from using this repository. By proceeding to do anything, you understand any action you perform is AT YOUR OWN RISK.

IMAGES

The schematic for the main battle robot

An image of the schematic of the main battle robot

The schematic for the remote controller

An image of the schematic of the remote controller

The PCB of the remote controller

An image of the PCB in KiCad for the remote controller A 3D angle of the PCB in KiCad Another 3D angle of the PCB in KiCad

Bill of Materials

NameUsePrice (Indian Rupees)QuantityTotalTotal (US Dollars)Link to Product
Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3AMotor Driver8092161818.01https://robu.in/product/drv8833-2-channel-dc-motor-driver-module/
Raspberry Pi Pico HMicrocontroller to use on the Battle Robot46614665.19https://robu.in/product/raspberry-pi-pico-with-headers/
NRF24L01+ 2.4GHz RF Transceiver ModuleTransceiver for RC Control7321461.63https://robu.in/product/micro-nrf24l01-power-enhanced-2-4ghz-rf-transceiver-module/
DC-DC 5V 3A BEC Power Supply Buck Step Down ModuleConverts 7.4V Battery Voltage to a usable 5V for the Raspberry Pi Pico and the servo motor used in the flipping mechanism901901https://robu.in/product/ultra-small-size-dc-dc-5v-3a-bec-power-supply-buck-step-down-module/
MCP1703-3302E/DB-MICROCHIP-Fixed LDO Voltage RegulatorConverts 7.4V Battery Voltage to a usable 3.3V for the NRF24L01+ transceiver module15823163.52https://robu.in/product/mcp1703-3302e-db-microchip-fixed-ldo-voltage-regulator-2-7v-to-16v-525mv-dropout-3-3vout-250maout-sot-223-3/
10 uF Through-Hole Electrolytic Capacitor0.8421.680.0188https://robu.in/product/10-uf-25v-through-hole-electrolytic-capacitor-pack-of-40/
1000 uF Through-Hole Electrolytic Capacitor111110.12https://robu.in/product/1000uf-25v-electrolytic-capacitor-dip-pack-of-5/
1 uF Through-Hole Electrolytic Capacitor1.6946.760.038https://robu.in/product/1-uf-50v-through-hole-electrolytic-capacitor-pack-of-40/
Pro-Range NMC 18650 7.4V 6000mAh 3C 2S2P Li-Ion Battery PackPortable Power for the main Battle Robot11261112612.53https://robu.in/product/pro-range-18650-li-ion-6000mah-7-4v-2s1p-protected-battery-pack-3c/
32V 1kA Blade Fuse 10A Automotive FusesPower Safety for the main Battle Robot162320.36https://robu.in/product/0287010-pxcn-littlefuse-32v-1ka-blade-fuse-10a-automotive-fuses-rohs/
Rocker SwitchPower Switch for the main Battle Robot and the remote controller62120.134https://robu.in/product/1-month-warranty-585/
37GB-3530 DC12V 320RPM/MIN Reduction MotorMotors for the main battle robot7154286031.84https://robu.in/product/37gb-3530-dc12v-320rpm-min-reduction-motor/
UL1007 18AWG PVC Electronic WirePower wires for the motors2310 metres2302.56https://robu.in/product/ul1007-18awg-pvc-electronic-wire-green/
8 x 12 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole PitchBoard to hold soldered components5521101.22https://robu.in/product/8-x-12-cm-universal-pcb-prototype-board-single-sided-2-54mm-hole-pitch/
100nf 50v Disc Capacitor110100.11https://robu.in/product/100nf-50v-through-hole-multilayer-ceramic-capacitor/
868-062-000-LITTELFUSE-868-062-000-FuseholderFuse holder for battery fuse6621321.46https://robu.in/product/868-062-000-littelfuse-868-062-000-fuseholder-automotive-blade-1-fuse-30-a-32-vac-32-vdc-ato/
0.91 inch 128 32 Blue OLED Display ModuleInformational Display for remote controller16911691.88https://robu.in/product/0-91-inch-128x32-i2c-iic-serial-blue-oled-lcd-display-module
Push ButtonControls input for remote controller233690.77https://robu.in/product/ds-451-push-button-momentary-switch-10mm-2pinoff-on/
PS2 Joystick Module Breakout SensorControls input for remote controller321320.36https://robu.in/product/joystick-module-ps2-breakout-sensor/
Nano V3.0 Compatible Development Board ATmega328PMicrocontroller to use on the remote controller18511852.06https://robu.in/product/atmega328p-5v-nano-v3-0-development-board-16mhz-ch340-type-c/
Pro-Range INR 18650 7.4V 2200mAh 2C 2S1P Li-Ion Battery PackPortable Power for the remote controller57615766.41https://robu.in/product/18650-li-ion-2200mah-7-4v-2s1p-protected-battery-pack-2c/
10K Resistor0.3531.050.012https://robu.in/product/10k-ohm-0-25w-metal-film-resistor-pack-of-100/
PCB (Only board - NO ASSEMBLY)PCB for the Remote Controller, will hand solder components900190010.01https://robu.in/product/online-pcb-manufacturing-service/
INR 9099.49$101.3328

Parts

17
QtyValueFootprintReferences
310KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3
3SW_PushButton_Switch_THT:SW_PUSH-12mmSW1, SW2, SW3
21uFCapacitor_SMD:C_0805_2012MetricC2, C3
110AFuse:FuseHolder_Blade_ATO_Littelfuse_FLR_178.6165F1
110uFCapacitor_SMD:C_0805_2012MetricC1
17.4V 18650 Battery 2200 mAh 2CTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalBT1
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1MCP1703Ax-330xxDBPackage_TO_SOT_SMD:SOT-223-3_TabPin2U4
1NRF24L01_BreakoutRF_Module:nRF24L01_BreakoutU2
1SW_SPSTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW4

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the RC Control Schematic PCB?

It measures 60 × 97 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RC Control Schematic use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RC Control Schematic KiCad files?

From the virajkhanna/BattleAxe repository on GitHub, at the commit this page was made from: the board is Schematics and PCBs/RC_Control_Files/RC_Control_Schematic.kicad_pcb and its schematic Schematics and PCBs/BattleAxe_Files/BattleAxe_Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RC Control Schematic design in my own project?

Its repository states no licence, so its author keeps all rights: ask virajkhanna before reusing the design.