4 layers70 × 70 mm
Ai camera
maxlab-io/tokay-lite-pcb
Tokay AI Camera - ESP32 camera development board
161 parts130CERN-OHL-P-2.0
4 layers70 × 82.5 mm
Frosting
VIPQualityPost/frosting1Nucleo-64 / Arduino form factor carrier for icesugar pro / colorlight i9 FPGA SODIMM boards.
- Size
- 70 × 82.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 205
- Pads
- 430
- Tracks, vias
- 961, 135
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Jun 2024
- Updated
- 13 Jun 2024
Overview
Frosting is an open-source printed circuit board by VIPQualityPost, from the VIPQualityPost/frosting repository on GitHub. It is a 4-layer board of 70 × 82.5 mm with 60 parts on 205 nets, routed with 961 tracks and 135 vias.
It is built around the SRV05-4 and XC6206-2.8V. Its parts include 18 resistors, 10 diodes, 8 capacitors, 8 connectors and 3 switches. It belongs with the fPGA and programmable logic boards of this library.
Main components
2
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
XC6206-2.8V
SOT-23-3L-40℃~+85℃@(Ta) 1 1uA 2.8V 250mA 350mV@(30mA) 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.md
Small, Nucleo-64 sized carrier for icesugar pro and colorlight i9 FPGA development boards. I designed this in order to be able to use the handful of Arduino and Morpho shields I have with these dev kits to avoid needing to use weird PMODS or breadboards.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 5k1 | Resistor_SMD:R_0402_1005Metric | R101, R102, R107, R108, R109, R110, R111, R112, R113, R114, R117, R118 |
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C101, C102, C103, C104, C105, C106, C107, C108 |
| 8 | WHT | LED_SMD:LED_0603_1608Metric | D101, D102, D103, D104, D105, D106, D107, D108 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R106, R115, R116 |
| 3 | M3 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H101, H102, H103 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric | R103, R104 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | ~ | C__Subversion_Altium_Designer_Library_MCD_PARTS.PcbLib:CON_SAMTEC_TSW-119-09-X-D | CN7, CN10 |
| 2 | ~ | C__Subversion_Altium_Designer_Library_MCD_PARTS.PcbLib:CON_SAMTEC_SSW-108-03-X-S | CN6, CN9 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R105 |
| 1 | 3V3OK | LED_SMD:LED_0603_1608Metric | D110 |
| 1 | 5VOK | LED_SMD:LED_0603_1608Metric | D109 |
| 1 | G*** | kibuzzard-665D4EFE | kibuzzard-665D4EFE |
| 1 | G*** | kibuzzard-665D501B | kibuzzard-665D501B |
| 1 | G*** | kibuzzard-665D4FC5 | kibuzzard-665D4FC5 |
| 1 | G*** | kibuzzard-665D4EF8 | kibuzzard-665D4EF8 |
| 1 | G*** | kibuzzard-665D4F76 | kibuzzard-665D4F76 |
| 1 | G*** | kibuzzard-665D4F04 | kibuzzard-665D4F04 |
| 1 | HRO-Type-C-31-M-12 | matei:HRO-TYPE-C-31-M-12 | J101 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U101 |
| 1 | USER1 | matei:TS-1187A-B-A-B | SW103 |
| 1 | USER2 | matei:TS-1187A-B-A-B | SW102 |
| 1 | USER3 | matei:TS-1187A-B-A-B | SW101 |
| 1 | XC6206 | Package_TO_SOT_SMD:SOT-23 | U102 |
| 1 | iCESugar-Pro | easyeda2kicad:SO-DIMM-SMD_200P-P0.60_1473005-4 | J102 |
| 1 | ~ | C__Subversion_Altium_Designer_Library_MCD_PARTS.PcbLib:CON_SAMTEC_SSW-110-03-X-S | CN5 |
| 1 | ~ | C__Subversion_Altium_Designer_Library_MCD_PARTS.PcbLib:CON_SAMTEC_SSW-106-03-X-S | CN8 |
Questions
How big is the Frosting PCB?
It measures 70 × 82.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Frosting use?
60 parts, built around the SRV05-4 and XC6206-2.8V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Frosting KiCad files?
From the VIPQualityPost/frosting repository on GitHub, at the commit this page was made from: the board is frosting.kicad_pcb and its schematic frosting.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Frosting design in my own project?
Its repository states no licence, so its author keeps all rights: ask VIPQualityPost before reusing the design.
Similar boards
- 2 layers229.8 × 102.6 mm
- 4 layers40.1 × 39.8 mm
Stm32g431-mt6701-stspin233
VIPQualityPost/aioli-foc
Small, simple closed loop BLDC driver implementing SimpleFOC
90 parts37 - 2 layers185.3 × 68 mm
- 2 layers253.3 × 113.3 mm
- 2 layers344.7 × 123.6 mm
- 2 layers103.2 × 107.2 mm
Blue team pad
fearherbs1/blue-team-pad
An open source macropad for the cyber security analyst.
82 parts6GPL-3.0 - 4 layers53.1 × 98 mm
